Enterasys Networks 8000/8600 manual SSR-HTX22-08-AA and SSR-HTX12-08-AA

Hardware Overview

SSR-HTX22-08-AA and SSR-HTX12-08-AA

The SSR-HTX22-08-AA and SSR-HTX12-08 line cards contain eight independent Ethernet ports. Each port senses whether it is connected to a 10-Mbps segment or a 100-Mbps segment and automatically configures itself as a 10BASE-T or 100BASE-TX port. Figure 18 shows the front panel of the SSR-HTX22-08-AA line card.

SSR-HTX22-08-AA							10/100BASE-TX
1	2	3	4	5	6	7	8
Offline
							Hot
Online							Swap

	10 BASE-T/100 BASE-TX ports		10 BASE-T/100 BASE-TX ports
	Figure 18. Front panel of SSR-HTX22-08-AA line card
LEDs
	Table 13. SSR-HTX22-08-AA line card LEDs
LED	Condition	Description
Offline	Amber	The line card is offline (powered off) and is ready for hot swap.
		The Offline LED also is lit briefly during a reboot or reset of the
		X-Pedition and goes out as soon as the control module
		discovers and properly initializes the line card.
Online	Green	When lit, this green LED indicates that the line card is online
		and is ready to receive, process, and send packets if configured
		to do so.
Link	Green	Each port has two LEDs on its connector. The green LED on the
		left side of the connector indicates the link status. When this
		LED is lit, the port hardware is detecting that a cable is plugged
		into the port and the port has established communication with
		the device at the other end.
Activity	Flashing amber	The port’s transceiver sent or received packets.

44 Enterasys X-Pedition 8000/8600 Getting Started Guide