SSR-GSX31-02
The SSR-GSX31-02 line card uses SC-style Media Interface Connectors (MICs) to attach to multimode fiber (MMF) cables.
To attach the segment cables to your SSR-GSX31-02 line card, obtain an MMF cable with an SC MIC and plug the MIC into the port connector. When you plug the other end of the cable into another device, ensure that the cable connected to the transmit port on the X-Pedition is connected to the receive port on the other device. The receive port on the X-Pedition should be connected to the transmit port on the other device.
Cabling and Connector Specifications
The following table lists the media specifications for the SSR-GSX31-02 (T-Series) line card.
Table 39. SSR-GSX31-02 Media Specifications
Port Type | Specification |
| |
1000BASE-SX | • 802.3z standard (also uses 802.3x for flow control) |
| • SC-style Media Interface Connector (MIC); either connection pin in the |
| MIC can be used for transmit or receive; see SSR-GSX31-02on page 114 |
| |
| information on attaching cables |
| • 62.5 micron or 50 micron multimode fiber-optic cable |
| • Maximum 220 or 275 meters (722 or 902 feet) segment length for 62.5 |
| micron fiber-optic cable, based on installed fiber bandwidth |
| • Maximum 500 or 550 meters (1640 or 1804 feet) segment length for 50 |
| micron fiber-optic cable, based on installed fiber bandwidth |
| |
Optics
Table 40. SSR-GSX31-02 (1000BASE-SX) 850 nm Fiber
Receiver Sensitivity
Minimum | -17 dBm |
Maximum | 0 dBm |
| |
Transmit Power
Minimum | -9.5 dBm |
Maximum | -4 dBm |
| |
114 | Enterasys X-Pedition 8000/8600 Getting Started Guide |
