Hardware Overview

SSR-GSX31-02

The SSR-GSX31-02 line card contains two independent Gigabit (1000 Mbps) Ethernet ports. The ports connect to multimode fiber (MMF) cables. Figure 14 shows the front panel of the SSR- GSX31-02 (T-Series) line card.

SSR-GSX31-02

1000BASE-SX

12

Offline

Tx

Link

 

Rx

AN

Online

Tx Link

Rx AN

Hot

Swap

Gigabit Port Gigabit Port

Figure 14. Front panel of SSR-GSX31-02 (T-Series) line card

LEDs.

Table 9. SSR-GSX31-02 line card LEDs

LED

Condition

Description

 

 

 

Offline

Amber

The line card is offline (powered off) but is ready for hot

 

 

swap.

 

 

The Offline LED also is lit briefly during a reboot or reset of

 

 

the X-Pedition but goes out as soon as the control module

 

 

discovers the line card.

 

 

 

Online

Green

The line card is online and is ready to receive, process, and

 

 

send packets if configured to do so.

 

 

 

Per-port Link

Green

The port hardware detects a cable plugged into the port and a

 

 

good link is established.

 

 

 

 

Red

The port received an error during operation.

 

(intermittent)

 

 

 

 

 

Red (solid)

The port hardware detects a cable plugged into the port,

 

 

however, a bad link is established.

 

 

 

 

Off

No link from the port exists.

 

 

 

Per-port Rx

Green

The port’s transceiver received a packet.

 

 

 

 

Amber

The port’s transceiver received a flow-control packet.

 

 

 

Per-port Tx

Green

The port’s transceiver transmitted a packet.

 

 

 

 

Amber

The port’s transceiver transmitted a flow-control packet.

 

 

 

Enterasys X-Pedition 8000/8600 Getting Started Guide

37

Page 49
Image 49
Enterasys Networks 8000/8600 manual SSR-GSX31-02