SYSTEM DESIGN examples
Minimum bridged load is 2 ohms.
Minimum load per channel is 1 ohm.
The front crossover frequency control determines the XS130's highpass.
The bandpass signal for the XS84’s midbass is created between the front and rear crossover frequency settings.
The rear crossover frequency control determines the auxiliary output's lowpass frequency.
The auxiliary output sends lowpass signals to another amplifier.
Use the LPL44 to control the auxiliary output's volume from the driver's seat.
NOTE: If connecting tweeters to the front outputs, set the frequency multiplier switch to X10. This multiplies the front crossover's frequency range by a factor of ten. The range becomes 400 to 8kHz.
