SYSTEM DESIGN examples
Minimum bridged load is 2 ohms.
Minimum load per channel is 1 ohm.
The front crossover frequency control determines the XS62's highpass frequency independently of the XS124 and rear speakers.
The rear crossover frequency control determines the XS124's lowpass frequency and auxiliary output's high- pass frequency.
The auxiliary outputs send highpass signals to another amplifier.
Use the LPL44 to control the XS124's volume from the driver's seat.
*For single preamp headunits, set the input select switch to FRONT. This allows signals from the front inputs to reach the rear crossover without the use of “Y” connectors.
