Connecting the System
PIEGA P SUB 1 MKII
Configuration example for stereo and surround mode
This is a widely used configuration for stereo mode, although it is less suitable for surround mode since there is a risk of overloading with small satellite loudspeakers. With this configuration, the connection is made to the amplifier. Refer to the appropriate manual for information about operation and connecting options for your AV receiver/power amplifier.
Subwoofer and loudspeaker terminals on the amplifier
Center
Speaker
Rear
Speaker R
Front
Speaker R
Rear
Speaker L
Front
Speaker L
Connection:
>Connect the P SUB 1 MKII cable to the subwoofer terminal marked
SPEAKER LEVEL INPUTS
>Connect the P SUB 1 MKII subwoofer cable to the amplifier terminal marked SPEAKER (or similar)
Front R | Rear R | Center | Rear L | Front L |
Amplifier
LFE / IN
INPUT
RL
OUTPUT
R+ L+
R- L-
SPEAKER LEVEL INPUTS
>Likewise connect up the loudspeakers (parallel) to the amplifier terminal marked SPEAKER (or similar)
>For this use two similar connection cables (not supplied)
>If necessary, connect the front, rear and center loudspeakers using the loudspeaker terminals provided on your AV receiver
Benefit:
Frequently used configuration in stereo mode >Flexible positioning of components...!
11
