Connection Options
PIEGA P SUB 1 MKII
Connection terminal for different applications...
Its large range of connection options offers the P SUB 1 MKII an unlimited number of configurations both for stereo and for surround mode. Refer to the appropriate user manual supplied for specific information on the loudspeakers used and components of your stereo or surround system.
LFE / IN
INPUT
RL
OUTPUT
R+L+
R-L-
SPEAKER LEVEL INPUTS
POWER
ON
230V
OFF
T3. 15AL250V FOR 230V INPUT
T5AL250V FOR 115V INPUT 115/230V - 50/60HZ 500W
Note:
>The connection terminal of the P SUB 1 MKII allows a number of possible configuration options for stereo and surround mode
>Depending on the equipment in use, select the appropriate configuration (see the following pages)
>The LFE/IN, INPUT, OUTPUT terminals for connecting to the
AV receiver or the stereo amplifier require connection cables with cinch plugs
>The SPEAKER LEVEL INPUT terminals for connecting amplified music signals can be connected with loudspeaker cables with or without banana plugs
Connecting the supply cable:
>Check whether the default switch position (240/115 V) of your P SUB 1 MKII corresponds to the standard supply voltage in your country
>Plug the supply cable provided with the loudspeakers into the appropriate socket
>Do not switch on the P SUB 1 MKII (POWER ON) until all cable connections have been made
7
