Connecting the System
PIEGA P SUB 1 MKII
Configuration example for surround mode
The most frequently used and ideal connection configuration for 5.1 surround applications is using an AV receiver with a separate subwoofer output. The settings can be adjusted individually for any loudspeaker via the menu. Refer to the user manual of the AV receiver you are using for information on the individual setup controls.
Dolby Digital System - Surround System with AV Receiver
Center
Speaker
Rear
Speaker R
Front
Speaker R
Rear
Speaker L
Front
Speaker L
Connection:
>Connect the P SUB 1 MKII cable to the terminal marked SUBWOOFER (or similar) on the AV receiver
>Connect the P SUB 1 MKII cable to the terminal on the subwoofer marked LFE/IN
Front R | Rear R | Center | Rear L | Front L |
LSubwoofer
R
Amplifier 
60Hz
CROSSOVER
FREQUENCY
40Hz 140Hz
LFE / IN
INPUT
RL
OUTPUT
R+L+
R-L-
SPEAKER LEVEL INPUTS
>For this use a suitable connection cable with cinch plugs (not supplied with the loudspeakers)
>Connect the front, rear and center loudspeakers using the loudspeaker terminals provided on your AV receiver
Benefit:
The most frequently used and ideal
connection configuration for 5.1 surround mode
>The P SUB 1 MKII can be tuned for optimum results...!
8
