PANEL FACILITIES
[ FRONT PANEL ]
1 | 2 | 3 | 4 | 5 |
English
|
| STEREO AMPLIFIER | zÀ².B |
|
POWER | ë |
|
|
|
|
|
| REFERENCE STEREO AMPLIFIER | |
ÑOFF _ON |
|
|
|
|
A SPEAKERS B |
| BASS | TREBLE |
|
PHONES |
|
|
| SB MODE |
| – | + | – | + |
VOLUME
MINMAX
CD | TUNER | PHONO LINE | TAPE 1/ | TAPE 2 |
|
| SB | MONITOR | |
BALANCE | INPUT SELECTOR |
| ||
DIRECT |
|
|
| TAPE 2 |
|
|
|
| MONITOR |
L | R |
|
|
|
Direct Energy MOS
~ = - 0 | 9 8 |
1POWER (Ñ OFF/_ ON) switch
Press to turn power to the unit ON and OFF.
This unit cannot be turned ON and OFF using the remote control unit.
2REMOTE CONTROL SENSOR window
3VOLUME control
Use to adjust the volume level.
4INPUT SELECTOR knob/indicators
Turn the knob clockwise or counterclockwise so that the indicator lights for your desired input source. Turning the knob clockwise causes the lit indicator to right. Turning counter- clockwise causes it to left.
CD : For compact disc playback with a CD player.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable.
LINE/SB : Set to this position when listening to the program from a component connected to the LINE/SURROUND BACK terminals.
TAPE 1/ : For playback with a cassette deck, CD
76
5TAPE 2 MONITOR button/indicator
Use when there is an adaptor component (graphic equalizer, etc.) or cassette deck connected to the TAPE2 MONITOR terminals.
On : Indicator lights when using the adaptor component or listening to the cassette deck.
Off : Indicator goes off when not in use.
NOTES:
ÖWhen no connections are made to the TAPE2 MONITOR terminals, or when they are not in use, be sure to set this switch to the off position. (No sound will be heard if it is set to the on position.)
ÖWhen the TAPE2 MONITOR indicator is on and the INPUT SELECTOR knob is not set to
6BALANCE control
Should normally be left in the center position. Adjust balance if the sound is louder from one of the speakers. If the right side is louder, turn toward the L (left) position and if the left side is louder, turn toward the R (right) position.
NOTE:
This control does not operate when the DIRECT button is in the on position.
7
<ARE7263> En