CONTENTS
FEATURES | 4 | OPERATIONS | 10 |
INSTALLATION | 4 | REMOTE CONTROL | 11 |
CONNECTIONS | 5 | TROUBLESHOOTING | 12 |
PANEL FACILITIES | 7 | SPECIFICATIONS | 13 |
FEATURES
7Advanced Direct Energy MOS Power Amp
Pioneer incorporates highest quality amp circuitry featur- ing Advanced Direct Energy MOS FET devices which can achieve higher performance. Together with Pioneer’s origi- nal Wide Range Linear Circuit technology they reduce power consumption while maintaining the power output of current models.
In terms of performance, this technology contributes to flat damping factor characteristics across the audio spectrum. It also allows a wide range and especially ultraÊ high fre- quencies to be reproduced more accurately and improves power linearity.
7Low power consumption design
7
60 W + 60 W/4 Ω (FTC)
(20
7Wide-Range Linear Circuit
This new current feedback circuit assures improved oper- ating stability for flat output impedance and stable driving of speakers across the full range of frequencies.
7Silent microprocessor system
7Stabilizer
Transformer stabilizer and stabilizer frame (attached to chassis) deliver powerful sound.
INSTALLATION
LOCATION
VENTILATION
Install the unit in a well ventilated location where it will not be exposed to high temperature or humidity.
Do not install the unit in a location which is exposed to direct rays of the sun, or near hot appliances or radiators. Excessive heat can adversely affect the cabinet and internal compo- nents. Installation of the unit in a damp or dusty environment may also result in a malfunction or an accident. (Avoid instal- lation near cookers etc., where the unit may be exposed to oily smoke, steam or heat.)
Do not install the unit on a tottered stand, nor on an unstable or inclined surface.
ÖWhen installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 60 cm at top, 10 cm at rear, and 30 cm at each side). If not enough space is provided between the unit and walls or other equipment, heat will build up inside, interfering with performance or causing malfunctions.
ÖDo not place on a thick carpet, bed, sofa or fabric having a thick pile. Do not cover with fabric or other covering. Anything that blocks ventilation will cause internal tem- perature to rise, which may lead to breakdown or fire hazard.
MAINTENANCE OF EXTERNAL SUR- FACES
ÖUse a polishing cloth or dry cloth to wipe off dust and dirt.
ÖWhen the surfaces are dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleaners.
ÖNever use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surfaces.
4
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement.
<ARE7263> En
