Speaker Setup
You only need to make this setting if you connected this player to your amplifier using the 5.1 channel analog outputs.
This setting does not affect any digital audio output.
Use the Speaker Setup screen to tell the player what kinds of speakers you have connected.
1Press HOME MENU and select ‘Initial Setup’.
2Select ‘Speakers’.
3Select ‘Speaker Setup’, then ‘Next Screen’.
4Use the / buttons to select a speaker.
| Initial Setup | ||
Video Out | Speaker Setup | ||
Audio Out |
|
| |
Language | C | Yes | |
Parental Lock | Ls/Rs | Yes | |
Network | L/R | Large | |
Spekaers | |||
|
| ||
Options |
|
| |
5Use the / buttons to change the speaker setup. Specify which speakers you have in your setup:
•C (Center): Yes or No
•Ls/Rs (Surround): Yes or No
•L/R (Main): Small or Large (This setting is only applicable if the C and Ls/Rs speakers are present.)
6Press ENTER to save the settings and exit the Speaker Setup screen.
Software updating
The software of the player can be updated by connecting it to the Internet using a LAN cable.
Important
•Depending on the Internet connection conditions, software updating may take a certain period of time (certain time is also required for downloading of software). Other operations are defeated during software updating.
•As the disc tray opens automatically when software updating starts, it is recommended to open the rack door if the player is installed in a rack with front doors. When the disc tray is open, never attempt to push close it by force (leave the disc tray open).
•Do not unplug the power cord during software updating. Otherwise, the updating will be aborted and malfunction may occur with the player.
Note | 08 |
•Steps 1 to 3 are the operations performed by the user (they are intended to download the software from the Internet).
•Steps 4 to 6 are the operations performed (automatically) by the player (they are intended to update the software).
1Press HOME MENU and select ‘Initial Setup’.
2Select ‘Options’, then ‘Software Update’.
3Select ‘Start’, then ‘Yes’.
| Initial Setup | ||
Video Out | Software Update | ||
Audio Out |
|
|
|
Language |
|
|
|
Parental Lock |
|
| No |
| Yes | ||
Network |
|
|
|
Spekaers |
|
|
|
Options |
|
|
|
Do not unplug the power cord during downloading.
The disc tray will open. Do not touch it. Wait awhile.
Start downloading?
•The player turns off automatically.
•If the player is already running the latest software, a help message will be displayed.
•Depending on the Internet connection conditions, software updating may take a certain period of time (certain time is also required for downloading of software). Other operations are defeated during software updating.
4 Downloading and updating of the software start.
The front panel display shows the following messages, and the player produces an operating sound (it does not output audio or video).
“POWER OFF”
“POWER ON”
“NET”
“DOWNLOAD”
5Updating starts.
•The front panel display shows messages such as
“DATA CHECK”, “WRT FLASH1”, “WRT DRIVE” and “WRT SUBCON”.
•Do not unplug the power cord during software updating.
6The disc tray opens automatically when updating completes.
•The front panel display shows “DL OK” and the player turns off automatically.
•When the disc tray is open, never attempt to push close it by force (leave the disc tray open).
7Verify that the software is updated properly.
•Step 7 is the operation performed by the user.
•Turn the player on. If the front panel display shows “DL OK”, the software has been updated successfully.
43
En
