Pioneer BDP-LX70A Putting the batteries in the remote control, What’s in the box

01 High quality audio • HDMI cable

• LAN cable

• Power cable

• Warranty card

Putting the batteries in the remote control

This player is compatible with Dolby TrueHD, Dolby Digital Plus, DTS-HD High Resolution Audio, Dolby Digital and DTS.

To enjoy Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution Audio at the maximum performance, connect this player to a Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution Audio-compatible AV amplifier using an HDMI cable. Then, after placing a Blu-ray Disc recording a material with Dolby TrueHD, Dolby Digital Plus or DTS-HD High Resolution Audio, open the disc menu and select “Dolby TrueHD”, “Dolby Digital Plus” or “DTS-HD High Resolution Audio” from the menu.

For the output conditions of various audio types, see About the audio output settings on page 42.

•Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

•“DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.

Movie file playback

Video files encoded in the Windows Media™ Video (WMV), MPEG-1/

2formats are playable from DVD-R/-RW, or from a connected media server.

Music file playback

This player supports various audio formats, including Windows Media Audio (WMA), MP3 and WAV. You can play files stored on DVD-R/-RW, or from a connected media server.

Photo file playback

PNG, GIF and JPEG image files — including the popular EXIF format used by most digital cameras to store picture shooting information together with the JPEG image — are playable from DVD-R/-RW, or from a connected media server.

•Windows Media™ is a trademark of Microsoft Corporation.

•This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.

What’s in the box

Please confirm that the following accessories are in the box along with these operating instructions when you open it:

•Remote control

•AA/R6P dry cell batteries x2

•Stereo audio cable (red/white plugs)

•Video cable (yellow plugs)

•Insert two AA/R6P batteries into the battery compartment following the indications (,) inside the compartment.

Important

Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following:

•Don’t mix new and old batteries together.

•Don’t use different kinds of batteries together — although they may look similar, different batteries may have different voltages.

•Make sure that the plus and minus ends of each battery match the indications in the battery compartment.

•Remove batteries from equipment that isn’t going to be used for a month or more.

•When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country/area.

•WARNING

Do not use or store batteries in direct sunlight or other excessively hot place, such as inside a car or near a heater. This can cause batteries to leak, overheat, explode or catch fire. It

can also reduce the life or performance of batteries.

D3-4-2-3-3_En

Using the remote control

Please keep in mind the following when using the remote control:

•Make sure that there are no obstacles between the remote and the remote sensor on the unit.

•The remote has a range of about 7 m (at an angle of 30º from either side of the sensor). Use within this range in front of the remote control sensor on the front panel.

•Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit’s remote sensor.

•Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit.

•Replace the batteries when you notice a fall off in the operating range of the remote.

•When the batteries run down or you change the batteries, the TV preset codes are automatically reset. See Resetting the player on page 45 to reset them.

6

En