Pioneer BDP-LX70A Connecting for Hdmi output, Connecting using the component video output

Connecting for HDMI output

If you have an HDMI or DVI (with HDCP) equipped monitor or display, you can connect it to this player using the supplied HDMI cable.

The HDMI connector outputs uncompressed digital video, as well as most digital audio formats.

Important

•This unit has been designed to be compliant with HDMI (High-Definition Multimedia Interface). Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers.

•If you change the display connected to the HDMI output, you will also need to change the output video resolution settings to match the new display (see Changing the output video resolution on page 12 to do this).

•The HDMI connection is compatible with 8-channel linear PCM signals (44.1 kHz to 192 kHz1, 16 bit/20 bit/24 bit), Dolby Digital, Dolby TrueHD, Dolby Digital Plus, DTS-HD High Resolution Audio and DTS (5.1 channel signals) bitstreams.

•Depending on the HDMI cable being used, 1080p output may not appear correctly (The supplied HDMI cable is capable of outputting 1080p video).

•If you connect a DVI device to the HDMI output of this player, ensure that it is compliant with High-bandwidth Digital Content

Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVIHDMI) to do so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information.

•Use an HDMI cable (supplied) to connect the HDMI OUT interconnect on this player to an HDMI interconnect on an HDMI-compatible display.

To HDMI interconnect

				HDMI-compatible display
CONTROL	IN
IR							AUDIO OUT	AUDIO OUT
	IN		Y				(5.1ch)	(2ch)
		VIDEO OUT				CENTER	SURROUND	FRONT
				DIGITAL AUDIO OUT			L	L
SETTING 2			PB
	HDMI OUT	LAN(100)
SETTING 1
IR RECEIVER		S	PR					R
			COMPONENT			SUB WOOFER	R
				COAXIAL	OPTICAL
			VIDEO OUT

•The arrow on the cable connector body should be face up for correct alignment with the connector on the player.

After switching on the player you may need to set the output video

resolution and HDMI colour space for compatibility with your 02 display. See Changing the output video resolution on page 12 and

HDMI Color Space in Using the Initial Setup menu on page 39.

About HDMI

HDMI supports both standard and high-definition video, plus standard and multi-channel surround-sound audio. HDMI features include uncompressed digital video, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI was developed to provide the technologies of High-bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant displays.

About HDMI Control

You can enable HDMI Control by turning the HDMI Control setting to On for all components connected via HDMI cable. Check the video output from this unit once you have completed making connections and settings for all components. You will need to check the video output each time you change connected components or remove the HDMI cable.

If you want to use an HDMI cable other than the supplied HDMI cable, use the one that supports the HDMI 1.3 specification (Category 2) or later. The HDMI Control functions may not operate properly if you do not use an HDMI cable that supports the HDMI 1.3 specification (Category 2) or later.

Connecting using the component video output

You can use the component video output instead of the standard video out jack to connect this player to your TV (or other equipment).

•Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV, monitor or AV receiver.

Be careful to match up the colours of the three jacks for correct connection.

						To component
						video input
TV
CONTROL	IN
IR							AUDIO OUT	AUDIO OUT
	IN		Y				(5.1ch)	(2ch)
		VIDEO OUT				CENTER	SURROUND	FRONT
				DIGITAL AUDIO OUT			L	L
SETTING 2			PB
	HDMI OUT	LAN(100)
SETTING 1
IR RECEIVER		S	PR					R
			COMPONENT			SUB WOOFER	R
				COAXIAL	OPTICAL
			VIDEO OUT

Note	11
1 There are some restrictions depending on the sampling rate. For more information see About the audio output settings on page 42.	En