Pioneer CLD-V2800 2.2 RS-232CInterface, 2.2 .1 RS-232CInterface Connector, port, Pin #, Level, RS-232C, Terminal, Input/Output, 1) The RS-232CConnector:

Chapter Two • CLD-V2800 Level III

2.2 RS-232C Interface

The RS-232C port receives signals from an external computer or controller via the appropriate RS-232C cable. Use Pioneer CC-12 cable for PC & compatibles with a DB-25 connector. Use CC-13 cable for PC & compatibles with DB-09 connector.

Use CC-04 cable for Macintosh computers with Apple Circular 8 connector.

2.2 .1 RS-232C Interface Connector

The CLD-V2800 can be controlled by a computer connected to the RS-232C port on the back of the player. This section gives specific information about: 1.) The RS- 232C Connector, 2.) The pin outs of the Serial Interface, 3.) Signal Characteristics, 4.) Connection to a computer.

1) The RS-232C Connector:

15-pin D-SUB connector, female, on the player. 15-pin D-SUB connector, male, on the cable.

8 7 6 5 4 3 2 1

● ● ● ● ● ● ● ●

● ● ● ● ● ● ●

15 14 13 12 11 10 9

CLD-V2800 — 15-pin D-Sub Connector

Figure 2-C

2) Serial Interface Pin Outs

		Pin #	Terminal		Input/Output	Level
	1		GND			GROUND
	2		TXD		OUTPUT	RS-232C
	3		RXD		INPUT	RS-232C
	4		DTR		OUTPUT	RS-232C
	5		No Connection
	6		No Connection
	7		No Connection
	8		No Connection
	9		No Connection
		10	No Connection
	11		GND			GROUND
	12		No Connection
	13		No Connection
		14	No Connection
	15		GND			GROUND
		Figure 2-D
CLD-V2800 Level III User’s Manual				TP 120 v. 1.0 • 10/95		2-3