Chapter Three •
47) REGISTER C SET | LD/CD |
|
|
| |||
Function: | Changes the current setting of Register C. (Miscellaneous) | ||||||
Format: | Integer | R C |
|
|
| ||
Explanation: | When power is turned ON, the Side Repeat function of Register C is | ||||||
| set to ON. If Function Switch 3 on the rear panel of the player is | ||||||
| ON (DOWN), the Load Start and | ||||||
| Register C are also set to ON. If Function Switch 4 is ON (DOWN), | ||||||
| background color will be set to Black. Baud Rates of 9600 and | ||||||
| 2400 cannot be set with this command. Note that some functions, | ||||||
| such as Test Mode, may suspend playback or disable further | ||||||
| control. Test Mode is for use only by Authorized Service Centers, for | ||||||
| evaluating player operations. |
|
|
| |||
| The functions listed below can be set. To set a function to ON, | ||||||
| give the value indicated by the integer. To set multiple functions | ||||||
| to ON, the integer values must be added up. All eight functions can | ||||||
| be specified in combination by using the decimal values from 0 to | ||||||
| 255. The completion status is returned immediately. |
|
| ||||
| NOTE: When “Repeat Side”, “Chapter Repeat” or “Track Repeat” is | ||||||
| selected by the RCU, the “Side Repeat” function of Register C goes | ||||||
| to “ON” and when “Auto Return” is selected by the RCU, the “Side | ||||||
| Repeat” function of Register C goes to “OFF”. |
|
|
| |||
|
|
|
|
|
|
|
|
| Integer |
| Function |
| 1 | 0 |
|
|
|
|
|
|
|
|
|
| 1 |
|
| ON | OFF |
| |
| 2 |
|
| ON | OFF |
| |
| 4 |
|
| ON | OFF |
| |
| 8 |
| (Not Used) |
| — | — |
|
| 16 |
| Background Color |
| BLACK | BLUE |
|
| 32 |
| TxD Terminator |
| <CR+LF> | <CR> |
|
| 64 |
| BAUD Rate |
| 1200 | 4800 |
|
| 128 |
| Test Mode |
| ON | OFF |
|
|
|
|
|
|
|
|
|
| Figure |
| |
Execution: | * | Initial value 0 |
|
| 3 R C <C/R> | R <C/R> | |
| * | ||
| 1 6 R C <C/R> | R <C/R> | |
| * | Background Color BLACK; |
TP 120 v. 1.0 • 10/95 |