Interface Cable Specifications
Connecting the CLD-V2800 to Macintosh and Apple II Computers
The CLD-V2800 uses the following cables to attach to the computers listed below:Computer | Pioneer Cable # | Connection |
| | |
Macintosh Plus, SE, II | | |
& Apple IIGS | CC - 04 | DB-15 male to Mini-Din 8 male |
| | |
Apple II, II+, IIE with | | |
Super Serial Card | CC - 03 | DB-15 male to DB-25 male |
| | |
Pin Configurations for Specific Cables
CC-03DB-15 male to DB-25 maleLD Player | | | | | | | Computer |
GND 1 | | | | | | | 7 | GND |
| | | | | |
TxD | 2 | | | | | 3 | RxD |
| | | |
RxD | 3 | | | | | 2 | TxD |
| | | |
DTR 4 | | | | | 5 | CTS |
| | |
| | | | | 6 | DSR |
| | | | |
Conn. Housing | | | | | | | Conn. Housing |
| | | | | |
| | | Shield | |
CC-04DB-15 male to Mini-Din 8 maleLD Player | | | | | | | Computer | |
GND 1 | | | | | | | 4 | Frame Ground |
| | | | | |
| | | | | 8 | RxD + |
| | |
TxD | 2 | | | | 5 | RxD - |
| | |
RxD | 3 | | | | | | 3 | TxD - |
| | | |
DTR 4 | | | 1 | HS OUT |
| |
Conn. Housing | | | | | | | Conn. Housing |
| | | | | |
| | | Shield | | |
The CC-03 is an RS-232C cable which interfaces Pioneer’s CLD-V2800, CLD-V2600, CLD-V2400, LD-V4400, LD-V8000, LD-V4200 (discontinued), LD-V2200 videodisc players and the LC-V330 AutoChanger to the IBM InfoWindow*, the Apple II series Super Serial Card and to Pioneer’s UC-V102 Videodisc Controller. Note: With a 25 pin female-to-female adapter, the CC- 03 can be used to connect the players to an IBM PC or compatible that supports a 25 pin RS-232C port.
The CC-04 is an RS-232C cable which interfaces Pioneer’s CLD-V2800, CLD-V2600, CLD-V2400, LD-V4400, LD-V8000, LD-V4200 (discontinued), LD-V2200 videodisc players and the LC-V330 AutoChanger to the Macintosh Plus, SE, Macintosh IIs, and Apple II GS computers. It connects the 15-pin RS-232C port on the player to the Circular-8 Modem port on the Apple/Macintosh.
*IBM InfoWindow does not support the LC-V330 AutoChanger.
B-2TP 120 v. 1.0 • 10/95 Appendix B CLD-V2800Interface Cable Specifications