MANUEL D’INSTALLATIONINSTALLATION MANUAL

DEH-2020MP

DEH-2000MPB

DEH-2000MP

DEH-1020E

DEH-1000E

<YRD5142-A/S> 1
<KMMZX>  <07G00000>
Printed in China 
Imprimé en Chine
<YRD5142-A/S> EW
<YRD5142-A/S> 1
Important
!Checkall connections and systems before
finalinstallation.
!Donot use unauthorized parts. Use of un-
authorizedparts may cause malfunctions.
!Consultyour dealer if installation requires dril-
lingof holes or other modifications to the vehi-
cle.
!Donot installthis unitwhere :
—itmay interfere with operation of the vehi-
cle.
—itmay cause injury to a passenger as a re-
sultof a sudden stop.
!Thesemiconductor laser will be damaged if it
overheats.Install this unit away from hot
placessuch as near the heater outlet.
!Optimumperformance is obtained when the
unitis installed at an angle of less than 60°.
60°

DIN front/rear mount

Thisunit can be properly installed either from
“Front”(conventionalDIN front-mount) or
“Rear”(DIN rear-mount installation, utilizing
threadedscrew holes at the sides of unit chas-
sis).For details, refer to the following installa-
tionmethods.
DIN Front-mount
Installationwith the rubber bush
1 Insertthe mounting sleeve into the
dashboard.
Wheninstalling in a shallow space, use a sup-
pliedmounting sleeve. If there is enough
spacebehind the unit, use factor y supplied
mountingsleeve.
2 Securethe mounting sleeve by using a
screwdriverto bend the metal tabs (90°)
intoplace.
3 Installthe unit.
Dashboard Rubberbush
Mountingsleeve Screw
Removingthe unit
1 Extendtop and bottom of the trim ring
outwardsto remove the trim ring. (When
reattachingthe trim ring, point the side
witha groove downwards and attach it.)
Trimring
!Itbecomes easy to remove the trim ring if
thefront panel is released.
2 Insertthe supplied extraction keys into
bothsides of the unit until they click into
place.
3 Pullthe unit out of the dashboard.
<YRD5142-A/S>3
Installation
En
<YRD5142-A/S> 2
DIN Rear-mount
1 Extendtop and bottom of the trim ring
outwardsto remove the trim ring. (When
reattachingthe trim ring, point the side
witha groove downwards and attach it.)
Trimring
!Itbecomes easy to remove the trim ring if
thefront panel is released.
2 Determinethe appropriate position
wherethe holes on the bracket and the
sideof the unit match.
3 Tightentwo screws on each side.
Screw
Mountingbracket Dashboardorconsole
!Useeither truss screws (5 mm × 8 mm) or
flushsurface screws (5 mm × 9mm), de-
pendingon the shape of screw holes in the
bracket.

Fastening the front panel

Ifyou do not plan to detach the front panel,
thefront panel can be fastened with supplied
screw.
Screw
<YRD5142-A/S>4
Installation
En
<YRD5142-A/S> 3
<YRD5142-A/S>34
<YRD5142-A/S> 4
<YRD5142-A/S> 1