Pioneer DEH-3000MP Repeating play, Playing tracks in random order, Scanning tracks or folders

Section

02Operating this unit

4To skip back or forward to another track, press c or d.

Notes

!Read the precautions with discs and player on page 15.

!If an error message such as ERROR-11 is dis- played, refer to Error messages on page 15.

!There is sometimes a delay between starting up disc playback and the sound being issued. When being read, FRMTREAD is displayed.

!When playing CD-EXTRA or MIXED-MODE CDs, compressed audio and CD-DA can be switched by pressing BAND.

!If you have switched between compressed audio and CD-DA, playback starts at the first track on the disc.

!The built-in CD player can play back com- pressed audio recorded on CD-ROM. (Refer to page 16 for files that can be played back.)

!When playing back VBR (variable bit rate) re- corded files, elapsed play time may not be dis- played correctly.

!When playing compressed audio, there is no sound on fast forward or reverse.

Repeating play

Repeat play plays the same track/folder within the selected repeat play range.

1Press FUNCTION to select RPT.

2Press c or d to select the repeat range. DSC – Repeat all tracks

TRK – Repeat just the current track

FLD – Repeat the current folder

# If you select another folder during repeat play,

the repeat play range changes to disc repeat.

# When playing CD, performing track search or fast forward/reverse cancels the repeat play auto-

matically.

# When playing compressed audio, performing track search or fast forward/reverse during TRK (track repeat) changes the repeat play range to folder repeat.

#When FLD (folder repeat) is selected, it is not possible to play back a subfolder of that folder.

#To return to the normal display, press BAND.

Playing tracks in random order

Tracks in a selected repeat range are played in random order.

1 Select the repeat range.

Refer to Repeating play on this page.

2Press FUNCTION to select RDM.

3Press a or b to turn random play on or

off.

When random play is on, RDM appears in the display.

If you turn random play on during folder re-

peat, FRDM appears in the display.

# To return to the normal display, press BAND.

Scanning tracks or folders

Scan play searches the song within the se- lected repeat range.

1 Select the repeat range.

Refer to Repeating play on this page.

2Press FUNCTION to select SCAN.

3Press a to turn scan play on.

SCAN appears in the display. The first 10 sec- onds of each track is played.

#If you turn scan play on during FLD, FSCN ap- pears in the display.

4When you find the desired track press

b to turn scan play off.

# If the display has automatically returned to the playback display, select SCAN again by press-

ing FUNCTION.

# After scanning of a disc (folder) is finished, normal playback of the tracks will begin again.

10 En