Section
02 
Operating this unit
Audio Adjustments | 2 Press a or b to adjust the level. |
Using balance adjustment | +6 to |
or decreased. | |
Fader/balance setting creates an ideal listen- | # To return to the normal display, press BAND. |
ing environment in all occupied seats. |
|
1Press AUDIO to select FAD.
2Press a or b to adjust front/rear speak- er balance.
FAD F15 to FAD R15 is displayed.
# FAD 0 is the proper setting when only two speakers are used.
3Press c or d to adjust left/right speaker balance.
BAL L15 to BAL R15 is displayed.
# To return to the normal display, press BAND.
Adjusting loudness
Loudness compensates for deficiencies in the low- and
1Press AUDIO to select LOUD.
2Press a or b to turn loudness on or off.
# You can also turn loudness on or off by press- ing LOUD.
3Press c or d to select a desired level.
LOW
# To return to the normal display, press BAND.
Using the equalizer
There are six stored equalizer settings such as
DYNAMIC, VOCAL, NATURAL, CUSTOM, FLAT and POWERFUL that can easily be re- called at any time.
!CUSTOM is an adjusted equalizer curve that you create.
!When FLAT is selected no supplement or correction is made to the sound.
%Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol- lowing equalizers:
Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM.
Adjusting bass/mid/treble
You can adjust the bass/mid/treble level.
1Press AUDIO to select BASS/MID/
TREBLE.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent ra- dical changes in volume when switching be- tween sources.
!Settings are based on the FM volume level, which remains unchanged.
!The MW/LW volume level can also be ad- justed with source level adjustments.
1Compare the FM volume level with the level of the source you wish to adjust.
2Press AUDIO to select SLA.
3Press a or b to adjust the source vo- lume.
SLA +4 to SLA
volume is increased or decreased.
# To return to the normal display, press BAND.
12
En
