Pioneer DEH-3000MP operation manual Operating this unit Other Functions

Operating this unit

Other Functions	1 Press FUNCTION to select A-PI.
Adjusting initial settings	2 Press a or b to turn the Auto PI seek
Using the initial settings, you can customize	on or off.
various system settings to achieve optimal per-
formance from this unit.	Switching the auxiliary setting
1 Press SOURCE and hold until the unit	It is possible to use auxiliary equipment with
turns off.	this unit. Activate the auxiliary setting when
2 Press SOURCE and hold until function	using auxiliary equipment connected to this
	unit.
name appears in the display.	1 Press FUNCTION to select AUX.
3 Press FUNCTION to select one of the in-
	2 Press a or b to turn the auxiliary set-
itial settings.
Press FUNCTION repeatedly to switch be-	ting on or off.
tween the following settings:
FM (FM tuning step)—A-PI (auto PI Seek)—	Saving the battery consumption
AUX (auxiliary input)—SAVE (power save)—
	Switching this function on enables you to save
TITLE (multi language)
	the consumption of battery power.
Use the following instructions to operate each
	! Operations other than turning on the
particular setting.
	source are not allowed when this function
# To cancel initial settings, press BAND.
	is on.
# You can also cancel initial settings by holding
down SOURCE until the unit turns off.	Important

Section

02

English

Setting the FM tuning step

Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on.

!The tuning step remains at 50 kHz during manual tuning.

1Press FUNCTION to select FM.

2Press c or d to select the FM tuning step.

Press c to select 50 (50 kHz). Press d to se- lect 100 (100 kHz).

Switching Auto PI Seek

The unit can automatically search for a differ- ent station with the same programming, even during preset recall.

If the battery in your vehicle is disconnected the Power Save mode is canceled. Turn on Power Save again once the battery has been recon- nected. If the ignition switch in your vehicle doesn’t have an ACC (accessory) position, it is possible depending on the connection method that when Power Save is off, the unit will draw power from the battery.

1Press FUNCTION to select SAVE.

2Press a or b to turn the power save on or off.

Multi language display setting

Text information such as title name, artist name or comment can be recorded on a com- pressed audio disc.

This unit can display them even if they are em- bedded in either European language or Rus- sian language.

En 13