Pioneer DEH-3000MP Tuner, Listening to the radio, Storing and recalling broadcast frequencies

	Section
Operating this unit	02

Tuner

Listening to the radio

1Press SOURCE to select the tuner.

2Press BAND to select a band.

Press BAND until the desired band (F1, F2 for FM or MW/LW) is displayed.

3Press c or d to set the sensitivity. FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

MW/LW: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

English

3To perform manual tuning, briefly press c or d.

4To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

c or d.

# If you press and hold c or d you can skip sta- tions. Seek tuning starts as soon as you release the button.

Storing and recalling broadcast frequencies

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

Memorized radio station frequency can be re-

called by pressing the preset tuning button.

# Up to 12 FM stations, 6 for each of the two FM bands, and 6 MW/LW stations can be stored in

memory.

# Press a or b to recall radio station frequen- cies.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Press FUNCTION to select LOCAL.

2Press a or b to turn local seek tuning on or off.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.

1Press FUNCTION to select BSM.

2Press a to turn BSM on.

Six strongest broadcast frequencies will be stored in the order of their signal strength.

#To cancel the storage process, press b.

Switching the RDS display

RDS (radio data system) contains inaudible in- formations that helps searching of the radio stations.

!RDS service may not be provided by all sta- tions.

!RDS functions such as AF and TA are only active when your radio is tuned to an RDS station.

%Press DISPLAY.

Press DISPLAY repeatedly to switch between the following settings:

Program service name—PTY information— Frequency

#PTY information and the frequency appear on the display for eight seconds.

En 7