Pioneer DEH-3000MP Built-inPlayer, Playing a disc, Receiving traffic announcements, English

	Section
Operating this unit	02

Limiting stations to regional programming

When AF is used, the regional function limits the selection of stations broadcasting regional programs.

1Press FUNCTION to select REG.

2Press a or b to turn the regional func- tion on or off.

Notes

!Regional programming and regional networks are organized differently depending on the country (i.e., they may change according to the hour, state or broadcast area).

!The preset number may disappear from the display if the tuner tunes in a regional station which differs from the originally set station.

!The regional function can be turned on or off independently for each FM band.

4Press TA while a traffic announcement is being received to cancel the announce- ment.

The tuner returns to the original source but re- mains in the standby mode until TA is pressed again.

Notes

!You can also turn the TA function on or off in the menu that appears with the pressing of

FUNCTION.

!The system switches back to the original source following traffic announcement recep- tion.

!Only TP and enhanced other network’s TP sta-

tions are tuned in during seek tuning or BSM when TA is on.

Built-in Player

Playing a disc

English

Receiving traffic announcements

TA (traffic announcement standby) lets you re- ceive traffic announcements automatically, no matter what source you are listening to. TA can be activated for both a TP station (a sta- tion that broadcasts traffic information) or an enhanced other network’s TP station (a station carrying information which cross-references TP stations).

1Tune in a TP or enhanced other net- work’s TP station.

TP indicator will light.

2Press TA to turn traffic announcement

standby on.

# To turn traffic announcements standby off, press TA again.

3Use VOLUME to adjust the TA volume when a traffic announcement begins.

The newly set volume is stored in memory and recalled for subsequent traffic announce- ments.

1Insert a CD (CD-ROM) into the disc load- ing slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

# You can eject a CD (CD-ROM) by pressing

EJECT.

2Press a or b to select a folder when

playing a compressed audio.

# You cannot select a folder that does not have

a compressed audio file recorded in it.

# To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

3To perform fast forward or reverse,

press and hold c or d.

# If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current disc (folder). (Refer to Searching every 10 tracks in the current disc or folder on page 11.)

En 9