Pioneer DEH-P7100BT Installing the unit on a left-handdrive car, Hook the belt on to the holder

Installation

Note

•Do not install this unit in such a place as may obstruct the driver’s view.

•Since interior layout differs depending on the type of vehicle, the ideal installation location for the unit also differs. When installing the unit, select a location that assures optimum transmission of signals from the unit to the car stereo.

Installing the unit on a left-hand drive car

Note

•When the unit is installed on a right-hand-drive car, the horizontal positions are inverted.

1. Hook the belt on to the holder.

2.Fix the holder to the inside edge of the steering wheel so that the holder is facing the driver.

•12 Wrap the belt around the outside edge of the steering wheel, passing the end through the slot in the holder.

3 Pull on the belt to tighten it then secure it using the other two hooks on the holder.

3. 4 Cut off the extra portion of the belt.

•5 If some of the belt still protrudes, fold it back into the slot so that it does not interfere with driving.

4.Fasten the other belt in the same way.

5.Install the remote control unit in the holder.

•When removing the remote control unit from the holder, move the corrugated release section toward the steering wheel and slide the remote control unit toward you.

14