Connecting to the control panel
Computers | Be sure to connect using the | |
included USB cable. | ||
|
Microphones | MIC | USB |
|
|
|
|
|
| |
| MIC1 |
| CD/ LINE PHO | |
|
|
| DIGITAL |
|
| 1 |
|
| TRIM |
| 2 |
|
| |
|
|
|
| |
| 3 |
| OVER |
|
|
|
|
| |
| MIC 1 |
| 10 |
|
|
| 7 |
| |
|
|
|
| |
|
| 0 LEVEL | 4 | HI |
| MIC 2 |
| 2 |
|
|
| 0 | 1 |
|
|
|
|
| |
| MIXING |
|
| |
| CUE | MASTER |
|
|
| LEVEL |
|
| |
|
|
| A | THRU |
Headphones |
| 0 |
|
|
PHONES
4
1MIC1 terminal (page 15)
Connects a microphone here.
2USB terminal (page 12)
Connect the computer.
3USB connection indicator
Lights when signals are being exchanged with the computer.
4PHONES terminal (page 14)
Connect headphones here.
Connecting this unit and computer
For instructions on operating in combination with Serato DJ, see the “Quick Start Guide – Serato DJ Edition”. For details, see Downloading the latest versions of the operating instructions and the Quick Start Guide - Serato DJ Edition (p.28).
1 Connect this unit to your computer via a USB cable.
This unit functions as an audio device conforming to the ASIO standards.
!This operation does not work with computers that do not support USB 2.0.
!When using
!When using
!The computer’s recommended operating environment depends on the DJ appli- cation. Be sure to check the recommended operating environment for the DJ application you are using.
!When another USB audio device is connected to the computer at the same time, it may not operate or be recognized normally.
We recommend only connecting the computer and this unit.
!When connecting the computer and this unit, we recommend connecting directly to this unit’s USB port.
2 Press [POWER] button.
Turn on the power of this unit.
!For Windows
—The message [Installing device driver software] may appear when this unit is first connected to the computer or when it is connected to a different USB port on the computer. Wait a while until the message [Your devices are ready for use] appears.
!When installing on Windows XP
—[Can Windows connect to Windows Update to search for software?] may appear while the installation is in progress. Select [No, not this time], then click [Next] to continue installation.
—[What do you want the wizard to do?] may appear while the instal- lation is in progress. Select [Install the software automatically (Recommended)], then click [Next] to continue installation.
—If [Windows Security] appears on the screen while the installation is in progress, click [Install this driver software anyway] and continue with the installation.
12En