—
This adjusts the sound level input to the [RETURN] terminal.
—
This sets the way in which the recorded sound is played.
This sets the balance between the original sound and the recorded sound.
This sets the way in which the recorded sound is played.

X-PAD(parameter 4)

The cycle at which the cut-off frequency is moved fluctuates

finely.

 

FLANGER1

A 1-cycle flanger effect is produced according to the beat fraction set with the [BEAT c, d] buttons.

Short delay

 

 

 

Time

 

Cycle

 

 

 

 

 

BEAT c, d buttons (parameter 1)

Use these to set the 1/4 – 64/1 effect time with respect to the

time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the cycle by which the flanger effect moves.

10 to 32000 (ms)

 

 

 

 

 

 

The further the control is turned clockwise, the more the effect

LEVEL/DEPTH control (param-

is stressed.

eter 3)

When turned all the way counterclockwise, only the original

 

 

 

sound is output.

X-PAD(parameter 4)

The cycle at which the flanger effect is moved fluctuates finely.

PHASER1

The phaser effect changes according to the beat fraction set with the [BEAT c, d] buttons.

Phase shift

Time

Cycle

Use these to set the cycle for moving the phaser effect as of BEAT c, d buttons (parameter 1) time of 1/4 – 64/1 with respect to the time of one beat of the

 

BPM.

TIME control (parameter 2)

This sets the cycle by which the phaser effect is moved.

10 to 32000 (ms)

 

 

The further the control is turned clockwise, the more the effect

LEVEL/DEPTH control (param-

is stressed.

eter 3)

When turned all the way counterclockwise, only the original

 

sound is output.

X-PAD(parameter 4)

The cycle at which the phaser effect is moved fluctuates finely.

ROBOT1

The original sound is changed to a sound like one produced by a robot.

BEAT c, d buttons (parameter 1)

Use this to set the degree of the effect sound.

-100–100

(%)

TIME control (parameter 2)

Use this to set the degree of the effect sound.

-100–100

(%)

 

LEVEL/DEPTH control (param- Sets the balance between the original sound and the effect

eter 3)

sound.

X-PAD(parameter 4)

This changes the degree of the effect sound.

MELODIC1 2

The mid-range of the sound being input at the point when the [ON/OFF] button is pressed is recorded, and the recorded sound is output according to the level of the sound being input.

BEAT c, d buttons (parameter 1) This sets the way in which the recorded sound is played.

TIME control (parameter 2)

LEVEL/DEPTH control (param- eter 3)

X-PAD(parameter 4)

SLIP ROLL1 2

The sound being input at the point when the [ON/OFF] is pressed is recorded, and the recorded sound is output repeatedly according to the beat fraction set with the [BEAT c, d] buttons.

When the effect time changes, the input sound is recorded again.

Original

Effect turned on

Changed from 1/2

 

 

 

 

 

to 1/1

 

 

Roll

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1/2 repeat

1/1 repeat

 

20En

BEAT c, d buttons (parameter 1)

Use these to set an effect time of 1/16 – 16/1 with respect to

the time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 4000 (ms)

 

LEVEL/DEPTH control (param- Use this to set the balance between the original sound and

eter 3)

ROLL.

X-PAD(parameter 4)

Use this to set the effect time.

ROLL1 2

The sound being input at the point when the [ON/OFF] is pressed is recorded, and the recorded sound is output repeatedly according to the beat fraction set with the [BEAT c, d] buttons.

Original

Effect turned on

1/1 roll

Repeated

BEAT c, d buttons (parameter 1)

Use these to set an effect time of 1/16 – 16/1 with respect to

the time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 4000 (ms)

 

LEVEL/DEPTH control (param- Use this to set the balance between the original sound and

eter 3)

ROLL.

X-PAD(parameter 4)

Use this to set the effect time.

REV ROLL1 2

The sound being input at the point when the [ON/OFF] button is pressed is recorded, and the recorded sound is reversed then output repeatedly according to the beat fraction set with the [BEAT c, d] buttons.

Original

Effect turned on

1/1 reverse roll

Reversed and repeated

BEAT c, d buttons (parameter 1)

Use these to set an effect time of 1/16 – 16/1 with respect to

the time of one beat of the BPM.

TIME control (parameter 2)

Use this to set the effect time.

10 to 4000 (ms)

 

LEVEL/DEPTH control (param- Use this to set the balance between the original sound and

eter 3)

ROLL.

X-PAD(parameter 4)

Use this to set the effect time.

SND/RTN (MIDI LFO)

Connect an external effector, etc., here.

By pressing the [LFO FORM (WAKE UP)] button, MIDI-compatible software and devices can be controlled using MIDI signals.

SND/RTN1

Connect an external effector, etc., here.

SEND

RETURN

Effector

DJM-900SRT Serato DJ Edition

BEAT c, d buttons (parameter 1) —

TIME control (parameter 2)

LEVEL/DEPTH control (param- eter 3)

X-PAD(parameter 4)

MIDI LFO

The MIDI signal (0 – 127) waveform is changed according to the track’s tempo.