Pioneer DJM-900SRT, DJM-900SRT Serato DJ Edition manual 23

Category			Button/Control/Switch			MIDI assignment	Trigger/Toggle	Transmitted data
			Name		Type
				CH1	Switch	CC 034	2	OFF=0, ON=127
				CH2	Switch	CC 035	2	OFF=0, ON=127
				CH3	Switch	CC 036	2	OFF=0, ON=127
	CH SELECT			CH4	Switch	CC 037	2	OFF=0, ON=127
BEAT EFFECTS				MIC	Switch	CC 038	2	OFF=0, ON=127
				CF.A	Switch	CC 039	2	OFF=0, ON=127
				CF.B	Switch	CC 040	2	OFF=0, ON=127
				MASTER	Switch	CC 041	2	OFF=0, ON=127
	MIDI LFO				Control	CC 118	—	0-127
	QUANTIZE				Button	Note 118	Trigger/Toggle	—
					Switch	CC 013	—	—
								TIME value (When FLANGER, PHASER
	TIME				Switch	CC 045	—	or FILTER is selected, the value is halved.
								When a negative value is selected, it is set
								to a positive value.)
	LEVEL/DEPTH				Control	CC 091	—	0-127
	X-PAD				Control	CC 116	—	Sends the [X-PAD] position information.
BEAT EFFECTS	ON/OFF
	X-PAD(touch)				Button	CC 114	2	OFF=0, ON=127	MIDI
	!	When an effect other than [SND/RTN (MIDI
		LFO)] is selected at BEAT EFFECT
	ON/OFF				Button	CC 085	Trigger/Toggle1	OFF=0, ON=127	assignment
	NOISE
	X-PAD(touch)				Button	CC 064	2	OFF=0, ON=127
	!	When [SND/RTN (MIDI LFO)] is selected at
		BEAT EFFECT
MIC	HI				Control	CC 030	—	0-127
	LOW				Control	CC 031	—	0-127
									map
	SPACE				Button	CC 105	Trigger/Toggle1	OFF=0, ON=127
SOUND COLOR FX	GATE/COMP				Button	CC 106	Trigger/Toggle1	OFF=0, ON=127
	DUB ECHO				Button	CC 107	Trigger/Toggle1	OFF=0, ON=127
	CRUSH				Button	CC 086	Trigger/Toggle1	OFF=0, ON=127
	FILTER				Button	CC 087	Trigger/Toggle1	OFF=0, ON=127
	Fader Start 1				Button	CC 088	Trigger/Toggle	OFF=0, ON=127
Fader Start	Fader Start 2				Button	CC 089	Trigger/Toggle	OFF=0, ON=127
	Fader Start 3				Button	CC 090	Trigger/Toggle	OFF=0, ON=127
	Fader Start 4				Button	CC 093	Trigger/Toggle	OFF=0, ON=127
HEADPHONES	MIXING				Control	CC 027	—	0-127
	LEVEL				Control	CC 026	—	0-127
	Timing Clock				—	Timing Clock	—	—
	Channel fader 1 or crossfader					Note 102	—	BACK CUE = 0, PLAY = 127
Fader Start operation3	Channel fader 2 or crossfader					Note 103	—	BACK CUE = 0, PLAY = 127
	Channel fader 3 or crossfader					Note 104	—	BACK CUE = 0, PLAY = 127
	Channel fader 4 or crossfader					Note 105	—	BACK CUE = 0, PLAY = 127
MIDI	START				Button	START	—	—
	STOP				Button	STOP	—	—

1When turning one button on switches another button from on to off, MIDI on and off messages are sent from the two buttons. When there is no button that switches off, only the MIDI on message is sent from the button that was pressed.

2When switched from one position to another position, the MIDI ON and OFF signals are sent respectively from both positions.

—When the [START/STOP] button is pressed for over 1 second, MIDI messages corresponding to the positions of the buttons, faders and controls are sent in a bundle (Snapshot). The MIDI Snapshot sends all MIDI messages other than MIDI start and MIDI stop.

3Operation differs depending on the setting of the [CROSS FADER ASSIGN (A, THRU, B)] selector switch.

—When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [THRU]: MIDI messages are sent when the [FADER START] button is set to [ON] and the channel fader is moved away from you from the nearest position towards you and when it is moved back to the nearest position towards you.

—When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [A]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far edge of the [B] side and when it is moved back to the far edge of the [B] side.

—When the [CROSS FADER ASSIGN (A, THRU, B)] selector switch is set to [B]: MIDI messages are sent when the [FADER START] button is set to [ON] and the crossfader is moved from the far edge of the [A] side and when it is moved back to the far edge of the [A] side.

En 23