Connecting the Player
Connection example 2.
AV amplifier without built-in decoder
By connecting to a regular AV amplifier or stereo amplifier, you can enjoy playback with improved sound quality.
•Connect this player’s audio output jacks to an amp’s CD, LD, AUX or other audio input jacks. (Do not connect to PHONO jacks.)
•For video output, connect this unit’s video output to the amplifier’s video input. Either the
•Surround sound can be enjoyed with amplifiers that have a
|
|
|
|
|
| COMPONENT |
|
|
|
|
|
|
|
| VIDEO OUT |
|
|
DIGITAL OUT |
|
| VIDEO OUT | Y | AUDIO OUT | |||
|
|
|
|
|
| |||
OPT. | CONTROL | 1 | 1 | 2 | CB | R | L | |
1 |
| |||||||
| IN | OUT |
|
| ||||
|
|
|
|
|
| |||
|
|
|
|
|
|
| ||
|
|
| 2 |
|
| CR | 2 |
|
|
|
|
|
|
|
|
| AC IN |
Coaxial cable
Optical fiber cable
1 | 2 |
DIGITAL IN | CONTROL |
OUT |
Cord with a mini plug (no resistance, 3.5ø)
Finally, connect to a home wall outlet.
Accessory video cord
| R | L |
VIDEO IN S- VIDEO IN | AUDIO IN |
|
AV amplifier |
| Accessory audio cord |
|
|
•When connecting to a component bearing the Pioneer Î mark:
If you use a commercially available cord with a mini plug (no resistance) to connect this player’s CONTROL IN jack to the CONTROL OUT jack of another component bearing the Î mark, you can control the player as though it were a component in a system (system control).
•If you connect for system control, you cannot operate the player directly by pointing the remote control at it and pressing buttons. Point the remote control unit at the component (AV amplifier etc..) connected to the CONTROL OUT jack for operation.
•When controlling as a system, be sure to make connection to the amplifier using an audio cord or a video cord, even when using only digital components.
•For more details, refer to the connected component’s operating instructions.
Note |
Cables can be found at your local audio/video dealer. |
16Connecting the Player
