Pioneer DV-05 operating instructions Digital recording components, Coaxial cable, Digital recorder

Connecting the Player

Connection example 3.	Digital recording components
Digital recording components	such as an MD, CD-R or DAT
	can be connected.

Make either optical digital or digital output (Coaxial) connection.

•When making optical digital connection, connect this unit’s optical digital output jack to the optical digital input jack on the recording component.

•When making coaxial digital connection, connect this unit’s coaxial digital output jack to the coaxial digital input jack on the recording component.

Preparation

Coaxial cable

						COMPONENT
						VIDEO OUT
DIGITAL OUT			VIDEO OUT	S-VIDEO OUT		Y	AUDIO OUT
OPT.	CONTROL		1	1	2	CB	R	L
							1
	IN	OUT
			2			CR	2
								AC IN

OperationBasic

Finally, connect to a home wall outlet.

Optical
fiber cable	2	Digital recorder
	DIGITAL IN	(MD, CD-R, DAT, etc.)

Note

When recording a Dolby Digital compatible DVD, set the “DOLBY DIGITAL” setting of “DIGITAL OUTPUT” to “DOLBY DIGITAL = PCM”. (Page 35)

Also, when recording an MPEG compatible DVD, set “MPEG” of “DIGITAL OUTPUT” to “MPEG = PCM”. When the DVD has been recorded in the Dolby Digital (AC-3) or MPEG format, leaving the setting as “DOLBY DIGITAL” or “MPEG” will result in noise being recorded. Additionally, copying of some discs is prohibited.

Cables can be found at your local audio/video dealer.

Setup

OperationDetailed

InformationOther

Connecting the Player

17

<VRB1205>