Pioneer DV-333 Video Connections, System Control Connections, S-Video Out, Component Video Out

Video Connections

This player features S-video, composite, and component video output possibilities.

Check the manual supplied with your TV or monitor to determine the best possible connection for your system. In addition to making physical connections to your TV or monitor, it is also necessary to assign the TV screen size. You can use the [Setup Navigator] in the Setup screen General to set whether you are using a wide screen or standard size TV or monitor (page 18). Additionally, you can use the [TV Screen] setting in the Setup screen Video menu (page 28).

S-VIDEO OUT

•Make S-video connections to a TV or monitor with S- video input to produce a high quality video image.

•Use an S-video cable (not supplied) to connect the output on the player to S-video input on the TV or monitor.

•When making S-video connections, make sure to set the VIDEO OUT SELECT switch on the rear panel of the player to the left to assign S-video output.

AC IN

VIDEO

OUT

SELECT

S-VIDEO

OUT

S-VIDEO IN

COMPONENT VIDEO OUT

•Make component video connections to a TV or monitor with component inputs to produce a higher quality video image.

•Use a component video cable or 3 video cords (not supplied) to connect the COMPONENT VIDEO OUT jacks on the player to the component jacks on the monitor.

•When making component video connections, make sure to set the VIDEO OUT SELECT switch on the rear panel of the player to the right to assign component video output.

AC IN

COMPONENT VIDEO OUT			VIDEO
Y	PB	PR		OUT
			SELECT

COMPONENT

VIDEO IN

Y

PB

PR

TV or monitor

TV or monitor

VIDEO OUT

•Make composite video connections to a standard TV or monitor with a video input jack.

•Use the supplied video cable to connect the VIDEO OUT jacks on the player to the video input on the TV or monitor.

•Be sure to match the color of the plug with the color of the jack (yellow).

•When making video connections, make sure to set the VIDEO OUT SELECT switch on the rear panel of the player to the left to assign composite video output.

AC IN

System Control Connections

Using a commercially available cord with a mini plug

(3.5 mm dia. with no resistance) to connect this player’s CONTROL IN jack to the CONTROL OUT jack of another PIONEER component bearing the ë mark, you can control the player as though it were a component in a system (system control).

•If you connect for system control, you cannot operate the player directly. Point the remote control unit at the component (AV amplifier, etc.) connected to the CONTROL OUT jack to operate.

•When controlling as a system, be sure to make a connection to the amplifier using an audio or video cord, even when using only digital components.

•For details, refer to the operation manuals of the connected components.

AC IN

VIDEO

OUT

SELECT

VIDEO

OUT

TV or

monitor

CONTROL

IN

CONTROL

OUT

VIDEO IN

Pioneer component with ë mark.

16