Lenovo RS210 manual Error code, Description, Action

Models: RS210

1 244
Download 244 pages 35.96 Kb
Page 34
Image 34
Manual background

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

vGo to the Lenovo support Web site at http://www.lenovo.com/support to check for technical information, hints, tips, and new device drivers or to submit a request for information.

Error code

Description

Action

 

 

 

 

3038003

Firmware corrupted

1.

Run the Setup utility, select Load Default

 

 

 

 

 

Settings, and save the settings to recover the

 

 

 

server firmware.

 

 

2.

(Trained service technician only) Replace the

 

 

 

system board.

 

 

 

3048005

Booted secondary (backup) UEFI image

Information message that the backup UEFI settings

 

 

are used.

 

 

 

 

3048006

Booted secondary (backup) UEFI image

1.

Run the Setup utility, select Load Default

 

because of ABR

 

 

Settings, and save the settings to recover the

 

 

 

 

 

 

primary UEFI settings.

 

 

2.

Turn off the server and remove it from the power

 

 

 

source.

 

 

3.

Reconnect the server to the power source, then

 

 

 

turn on the server.

 

 

 

 

305000A

RTC date/time is incorrect

1.

Adjust the date and time settings in the Setup

 

 

 

 

 

utility, and then restart the server.

 

 

2.

Reseat the battery.

 

 

3.

Replace the following components one at a time,

 

 

 

in the order shown, restarting the server each

 

 

 

time:

 

 

 

a. Battery

 

 

 

b. (Trained service technician only) System board

 

 

 

 

3058001

System configuration invalid

1.

Run the Setup utility, and select Save Settings.

 

 

 

 

2.

Run the Setup utility, select Load Default

 

 

 

Settings, and save the settings.

 

 

3.

Replace the following components one at a time,

 

 

 

in the order shown, restarting the server each

 

 

 

time:

 

 

 

a. Battery

 

 

 

b. Failing device (if the device is a FRU, it must

 

 

 

be replaced by a trained service technician

 

 

 

only)

 

 

 

c. (Trained service technician only) System board

 

 

 

 

26ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual

Page 34
Image 34
Lenovo RS210 manual Error code, Description, Action