Lenovo RS210 manual Error code, Description, Action

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

vGo to the Lenovo support Web site at http://www.lenovo.com/support to check for technical information, hints, tips, and new device drivers or to submit a request for information.

Error code	Description	Action
0058007	DIMM population is unsupported.	1.	Reseat the DIMMs, and then restart the server.
		2.	Remove the lowest-numbered DIMM pair of
			those that are identified and replace it with an
			identical pair of known good DIMMs, then restart
			the server.
		3.	Return the removed DIMMs, one pair at a time,
			to their original connectors, restarting the server
			after each pair, until a pair fails. Replace the
			DIMMs in the failed pair with identical known
			good DIMMs, restarting the server after each
			DIMM is installed. Replace the failed DIMM.
			Repeat this step until you have tested all removed
			DIMMs.
		4.	(Trained service technician only) Replace the
			system board.
0058008	DIMM failed memory test.	1.	Reseat the DIMMs, and then restart the server.
		2.	Replace the following components one at a time,
			in the order shown, then restart the server after
			each:
			a. DIMM
			b. (Trained service technician only) System board
00580A4	Memory population changed.	Information only. Memory has been added, moved,
		or changed.
0068002	CMOS battery cleared.	1.	Reseat the battery.
		2.	Clear the CMOS memory (see Table 6 on page
			111).
		3.	Replace the following components one at a time,
			in the following order, restarting the server after
			each one:
			a. Battery
			b. (Trained service technician only) System board
2011001	PCI-X PERR	1.	Check the riser-card LEDs.
		2.	Reseat all affected adapters and riser cards.
		3.	Update the PCI adapter firmware.
		4.	Remove the adapter from the riser card.
		5.	Replace the following components one at a time,
			in the order shown, restarting the server each
			time:
			a. Riser card
			b. (Trained service technician only) System board

24ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual