Lenovo RS210 manual New Key and Certificate

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Redundancy Bckup Mem Status has	Error	Redundancy has been lost	1. Check the system-event log
been reduced.		and is insufficient to
			for DIMM failure events
		continue operation.
			(uncorrectable or PFA) and
			correct the failures.
			2. Re-enable mirroring in the
			Setup utility.
IMM Network Initialization	Info	An IMM network has	No action; information only.
Complete.		completed initialization.
Certificate Authority %1 has	Error	A problem has occurred	1. Make sure that the certificate
detected a %2 Certificate Error.		with the SSL Server, SSL
			that you are importing is
(%1 = IBM_CertificateAuthority.		Client, or SSL Trusted CA
			correct.
CADistinguishedName;		certificate that has been
			2. Try importing the certificate
%2 = CIM_PublicKeyCertificate.		imported into the IMM. The
			again.
ElementName)		imported certificate must
		contain a public key that
		corresponds to the key pair
		that was previously
		generated by the Generate a
		New Key and Certificate
		Signing Request link.
Ethernet Data Rate modified from	Info	A user has modified the	No action; information only.
%1 to %2 by user %3.		Ethernet port data rate.
(%1 = CIM_EthernetPort.Speed;
%2 = CIM_EthernetPort.Speed;
%3 = user ID)
Ethernet Duplex setting modified	Info	A user has modified the	No action; information only.
from %1 to %2 by user %3.		Ethernet port duplex setting.
(%1 = CIM_EthernetPort.FullDuplex;
%2 = CIM_EthernetPort.FullDuplex;
%3 = user ID)
Ethernet MTU setting modified from	Info	A user has modified the	No action; information only.
%1 to %2 by user %3.		Ethernet port MTU setting.
(%1 = CIM_EthernetPort.
ActiveMaximumTransmissionUnit;
%2 = CIM_EthernetPort.
ActiveMaximumTransmissionUnit;
%3 = user ID)
Ethernet Duplex setting modified	Info	A user has modified the	No action; information only.
from %1 to %2 by user %3.		Ethernet port MAC address
(%1 = CIM_EthernetPort.		setting.
NetworkAddresses;
%2 = CIM_EthernetPort.
NetworkAddresses;
%3 = user ID)
Ethernet interface %1 by user %2.	Info	A user has enabled or	No action; information only.
(%1 =		disabled the Ethernet
CIM_EthernetPort.EnabledState;		interface.
%2 = user ID)

Chapter 4. Diagnostics 43