5.Use the thermal-grease syringe to place 9 uniformly spaced dots 1 of 0.02 mL each on the top of the microprocessor 2. Make sure that the outermost dots are within 5 mm of the edge, to ensure even distribution.

Note: 0.01mL is one tick mark on the syringe. If the grease is properly applied, approximately half (0.22 mL) of the grease will remain in the syringe.

6.Install the heat sink onto the microprocessor as described in “Installing the microprocessor” on page 141.

Replacing the system board

To replace the system board, use the following procedures:

Removing the system board

Note: When you replace the system board, you must either update the server with the latest firmware or restore the pre-existing firmware that the customer provides on a diskette or CD image. Make sure that you have the latest firmware or a copy of the pre-existing firmware before you proceed.

To remove the system board, complete the following steps

1.Read the safety information in “Important Safety Information” on page 1 and “Guidelines for trained service technicians” on page 115.

2.Turn off the server and any attached devices.

3.Turn off the peripheral devices and disconnect all power cords; then, remove the cover (see “Removing and installing the cover” on page 119).

Note: When you replace the system board, you must either update the server with the latest firmware or restore the pre-existing firmware that the customer provides on a diskette or CD image. Make sure that you have the latest firmware or a copy of the pre-existing firmware before you proceed.

4.Remove the riser-card assembly (see “Removing the riser-card assembly” on page 157).

5.Remove the IBM ServeRAID-BR10il SAS/SATA controller if one is installed (see “Removing an IBM ServeRAID-BR10il SAS/SATA Controller” on page 159).

6.Remove the DIMM air baffle (see “Removing and installing the DIMM air baffle” on page 121).

7.Remove the heat sink and microprocessor, and set them aside on a static-protective surface for reinstallation (see “Removing the microprocessor” on page 140).

144ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual

Page 151 Page 153
Page 152
Image 152
Lenovo RS210 manual Replacing the system board, Removing the system board
Page 151 Page 153

RS210 specifications

The Lenovo RS210 is an innovative and compact server designed to meet the demands of small to medium-sized businesses and edge computing environments. As part of Lenovo's robust server line, the RS210 delivers enhanced performance, efficiency, and reliability, making it a perfect fit for businesses looking to optimize their IT infrastructure.

One of the standout features of the RS210 is its compact design, which allows it to fit seamlessly into space-constrained environments. With a 1U rack-mountable form factor, the RS210 is ideal for organizations that need to maximize their data center space without sacrificing performance. This small footprint is complemented by Lenovo's intelligent cooling technology, which helps maintain optimal operating temperatures while reducing energy consumption.

The RS210 is powered by the latest Intel Xeon processors, delivering exceptional processing power and providing a scalable solution for growing business needs. With support for both single and dual-processor configurations, it can handle a wide range of workloads, allowing businesses to run applications efficiently. The server also features up to 128GB of DDR4 RAM, ensuring that it can manage multiple simultaneous tasks seamlessly.

Storage capabilities are another strong point for the RS210, as it supports a variety of storage options, including SAS, SATA, and SSD drives. This flexibility enables organizations to configure the server to meet their specific storage requirements while ensuring high-performance access to data. Additionally, the RS210 supports RAID configurations, providing redundancy and data protection, which is crucial for maintaining business continuity.

Networking in the RS210 is fortified by multiple Gigabit Ethernet ports, ensuring robust connectivity options. This feature is vital for organizations that require reliable communication between servers and network devices. For enhanced security, Lenovo has incorporated built-in features such as Trusted Platform Module (TPM) for hardware-based security and secure access options to safeguard sensitive data.

Lenovo's commitment to management and monitoring is evident in the RS210, as it includes the Lenovo XClarity Controller. This integrated management tool simplifies server administration, allowing IT teams to deploy, monitor, and manage the server efficiently, leading to reduced operational costs and increased uptime.

In conclusion, the Lenovo RS210 stands out in the market as a compact, powerful, and versatile server solution designed for a variety of workloads. With its impressive processing power, flexible storage options, and robust management features, it is well-equipped to support the evolving needs of modern businesses, making it a reliable choice for IT professionals looking to invest in a future-proof server infrastructure.
Top Page Image Contents