Lenovo RS210 manual DSA Preboot messages continued

Table 5. DSA Preboot messages (continued)

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a Trained service technician.

vGo to the Lenovo support Web site at http://www.lenovo.com/support to check for technical information, hints, tips, and new device drivers or to submit a request for information.

Message
number	Component	Test	State	Description	Action
089-802-xxx	CPU	CPU Stress	Aborted	System	1.	Turn off and restart the system.
		Test		resource
					2.	Make sure that the DSA code is at the latest level.
				availability
						For the latest level of DSA code, go to
				error.
						http://www.lenovo.com/support.
					3.	Run the test again.
					4.	Make sure that the system firmware is at the
						latest level. The installed firmware level is shown
						in the DSA event log in the Firmware/VPD
						section for this component. For the latest level of
						firmware, go to http://www.lenovo.com/support
						and select your system to display a matrix of
						available firmware.
					5.	Run the test again.
					6.	Turn off and restart the system if necessary to
						recover from a hung state.
					7.	Run the test again.
					8.	Make sure that the system firmware is at the
						latest level. The installed firmware level is shown
						in the DSA event log in the Firmware/VPD
						section for this component. For more information,
						see “Updating the firmware” on page 212.
					9.	Run the test again.
089-802-xxx	CPU	CPU Stress	Aborted	System	1.	Replace the following components one at a time,
		Test		resource
						in the order shown, and run this test again to
				availability
						determine whether the problem has been solved:
				error.
						a. (Trained service technician only)
						Microprocessor board
						b. (Trained service technician only)
						Microprocessor
					2.	If the failure remains, go to the Lenovo support
						Web site at http://www.lenovo.com/support to
						check for technical information, hints, tips, and
						new device drivers or to submit a request for
						information.

Chapter 4. Diagnostics 71