Lenovo RS210 manual The System %1 encountered a POST

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

The System %1 encountered a POST	Error	A POST error has occurred.	1.	Update the server firmware
Error.		(Sensor = Firmware Error)
				on the primary page.
(%1 = CIM_ComputerSystem.
				Important: Some cluster
ElementName)
				solutions require specific code
				levels or coordinated code
				updates. If the device is part
				of a cluster solution, verify
				that the latest level of code is
				supported for the cluster
				solution before you update
				the code.
			2.	(Trained service technician
				only) Replace the system
				board.
A Uncorrectable Bus Error has	Error	A bus uncorrectable error	1.	Check the system-event log.
occurred on system %1.		has occurred.
			2.	Check the PCI error LEDs.
(%1 = CIM_ComputerSystem.		(Sensor = Critical Int PCI)
			3. Remove the adapter from the
ElementName)
				indicated PCI slot.
			4. Check for a server firmware
				update.
				Important: Some cluster
				solutions require specific code
				levels or coordinated code
				updates. If the device is part
				of a cluster solution, verify
				that the latest level of code is
				supported for the cluster
				solution before you update
				the code.
			5.	(Trained service technician
				only) Replace the system
				board.

Chapter 4. Diagnostics 35