Lenovo RS210 manual Installing a DVD drive

5.Remove the retention clip 1 from the drive and save for future use.

6.If you are instructed to return the DVD drive, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Installing a DVD drive

The following notes describe the type of drives that the server supports and other information that you must consider when you install a DVD drive.

vLocate the documentation that comes with the drive and follow those instructions in addition to the instructions in this chapter.

vMake sure that you have all the cables and other equipment that are specified in the documentation that comes with the drive.

vThe server supports one ultra-slim SATA DVD drive.

To install a DVD drive, complete the following steps:

1.Read the safety information in “Important Safety Information” on page 1 and “Guidelines for trained service technicians” on page 115.

2.Turn off the server and peripheral devices and disconnect the power cords and all external cables.

3.Remove the cover (see “Removing and installing the cover” on page 119).

4.Touch the static-protective package that contains the new DVD drive to any unpainted metal surface on the server; then, remove the drive from the package and place it on a static-protective surface.

5.Follow the instructions that come with the drive to set any jumpers or switches.

Chapter 6. Replacing FRUs 165