6.Release the loops of the drive tray.

7.Insert the filler panel into the bay to cover the drive.

Note: If the server is configured for RAID operation using a RAID controller, you might have to reconfigure your disk arrays after you install hard disk drives. See the RAID controller documentation for additional information about RAID operation and complete instructions for using the RAID controller.

8.Go to “Completing the FRU replacement” on page 173.

Removing a hot-swap hard disk drive

The 3.5-inch drive hot-swap server models support either two SAS 3.5-inch hard disk drives or two SATA 3.5-inch hard disk drives. The 2.5-inch drive hot-swap server models support four 2.5-inch SAS hard disk drives.

The removal and installation procedures are the same for any of these drives. The illustrations in this procedure show 3.5-inch SAS drives.

To remove a hot-swap hard disk drive, complete the following steps.

Attention: To avoid damage to the hard disk drive connectors, make sure that the server cover is in place and fully closed whenever you install or remove a hard disk drive.

1.Move the handle 1 on the drive to the open position (perpendicular to the drive).

2.Slide the release latch (gray on 3.5-inch hard drives and orange on 2.5-inch hard drives) gently to the left to unlock the drive handle.

128ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual

Page 136
Image 136
Lenovo RS210 manual Removing a hot-swap hard disk drive

RS210 specifications

The Lenovo RS210 is an innovative and compact server designed to meet the demands of small to medium-sized businesses and edge computing environments. As part of Lenovo's robust server line, the RS210 delivers enhanced performance, efficiency, and reliability, making it a perfect fit for businesses looking to optimize their IT infrastructure.

One of the standout features of the RS210 is its compact design, which allows it to fit seamlessly into space-constrained environments. With a 1U rack-mountable form factor, the RS210 is ideal for organizations that need to maximize their data center space without sacrificing performance. This small footprint is complemented by Lenovo's intelligent cooling technology, which helps maintain optimal operating temperatures while reducing energy consumption.

The RS210 is powered by the latest Intel Xeon processors, delivering exceptional processing power and providing a scalable solution for growing business needs. With support for both single and dual-processor configurations, it can handle a wide range of workloads, allowing businesses to run applications efficiently. The server also features up to 128GB of DDR4 RAM, ensuring that it can manage multiple simultaneous tasks seamlessly.

Storage capabilities are another strong point for the RS210, as it supports a variety of storage options, including SAS, SATA, and SSD drives. This flexibility enables organizations to configure the server to meet their specific storage requirements while ensuring high-performance access to data. Additionally, the RS210 supports RAID configurations, providing redundancy and data protection, which is crucial for maintaining business continuity.

Networking in the RS210 is fortified by multiple Gigabit Ethernet ports, ensuring robust connectivity options. This feature is vital for organizations that require reliable communication between servers and network devices. For enhanced security, Lenovo has incorporated built-in features such as Trusted Platform Module (TPM) for hardware-based security and secure access options to safeguard sensitive data.

Lenovo's commitment to management and monitoring is evident in the RS210, as it includes the Lenovo XClarity Controller. This integrated management tool simplifies server administration, allowing IT teams to deploy, monitor, and manage the server efficiently, leading to reduced operational costs and increased uptime.

In conclusion, the Lenovo RS210 stands out in the market as a compact, powerful, and versatile server solution designed for a variety of workloads. With its impressive processing power, flexible storage options, and robust management features, it is well-equipped to support the evolving needs of modern businesses, making it a reliable choice for IT professionals looking to invest in a future-proof server infrastructure.