Lenovo RS210 manual Error code, Description, Action

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

vGo to the Lenovo support Web site at http://www.lenovo.com/support to check for technical information, hints, tips, and new device drivers or to submit a request for information.

Error code	Description	Action
3058004	Three boot failure	1.	Undo any recent system changes, such as new
			settings or newly installed devices.
		2.	Make sure that the server is attached to a reliable
			power source.
		3.	Make sure that the operating system is not
			corrupted.
		4.	Run the Setup utility, save the configuration, and
			then restart the server.
		5.	See “Problem determination tips” on page 104.
3108007	System configuration restored to default	Information only. This message is usually associated
	settings	with the CMOS battery clear event.
3138002	Boot configuration error	1.	Remove any recent configuration changes made
			to the Setup utility.
		2.	Run the Setup utility, select Load Default
			Settings, and save the settings.
3808000	IMM communication failure	1.	Remove power from the server for 30 seconds,
			and then reconnect the server to power and
			restart it.
		2.	Update the IMM firmware to the latest level (see
			“Updating the firmware” on page 212).
		3.	Make sure that the virtual media key is seated
			and not damaged.
		4.	(Trained service technician only) Replace the
			system board.
3808002	Error updating system configuration to IMM	1.	Remove power from the server, and then
			reconnect the server to power and restart it.
		2.	Run the Setup utility and select Save Settings.
		3.	Update the IMM firmware to the latest level (see
			“Updating the firmware” on page 212).
3808003	Error retrieving system configuration from	1.	Remove power from the server, and then
	IMM
			reconnect the server to power and restart it.
		2.	Run the Setup utility and select Save Settings.
		3.	Update the IMM firmware to the latest level (see
			“Updating the firmware” on page 212).

Chapter 4. Diagnostics 27