Lenovo RS210 manual DSA Preboot messages continued

Models: RS210

1 244
Download 244 pages 35.96 Kb
Page 101
Image 101
Manual background

Table 5. DSA Preboot messages (continued)

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a Trained service technician.

vGo to the Lenovo support Web site at http://www.lenovo.com/support to check for technical information, hints, tips, and new device drivers or to submit a request for information.

Message

 

 

 

 

 

 

number

Component

Test

State

Description

Action

 

 

 

 

 

 

 

202-802-xxx

Memory

Memory

Failed

General error:

1.

Make sure that all memory is enabled by checking

 

 

Stress Test

 

memory size is

 

 

 

 

the Available System Memory in the Resource

 

 

 

 

insufficient to

 

 

 

 

 

 

Utilization section of the DSA event log. If

 

 

 

 

run the test.

 

 

 

 

 

 

necessary, enable all memory in the Setup utility

 

 

 

 

 

 

 

 

 

 

 

 

(see “Using the Setup Utility” on page 200).

 

 

 

 

 

2.

Make sure that the DSA code is at the latest level.

 

 

 

 

 

 

For the latest level of DSA code, go to

 

 

 

 

 

 

http://www.lenovo.com/support.

 

 

 

 

 

3.

Run the test again.

 

 

 

 

 

4.

Run the standard memory test to validate all

 

 

 

 

 

 

memory.

 

 

 

 

 

5.

If the failure remains, go to the Lenovo Web site

 

 

 

 

 

 

for more troubleshooting information at

 

 

 

 

 

 

http://www.lenovo.com/support..

 

 

 

 

 

 

 

202-901-xxx

Memory

Memory

Failed

Test failure.

1.

Run the standard memory test to validate all

 

 

Stress Test

 

 

 

 

 

 

 

memory.

 

 

 

 

 

 

 

 

 

 

 

2.

Make sure that the DSA code is at the latest level.

 

 

 

 

 

 

For the latest level of DSA code, go to

 

 

 

 

 

 

http://www.lenovo.com/support.

 

 

 

 

 

3.

Turn off the system and disconnect it from power.

 

 

 

 

 

4.

Reseat the DIMMs.

 

 

 

 

 

5.

Reconnect the system to power and turn on the

 

 

 

 

 

 

system.

 

 

 

 

 

6.

Run the test again.

 

 

 

 

 

7.

If the failure remains, go to the Lenovo Web site

 

 

 

 

 

 

for more troubleshooting information at

 

 

 

 

 

 

http://www.lenovo.com/support..

 

 

 

 

 

 

 

Chapter 4. Diagnostics 93

Page 101
Image 101
Lenovo RS210 manual DSA Preboot messages continued