Lenovo RS210 manual

vFollow the suggested actions in the order in which they are listed in the Action column until the problem is solved.

vSee Chapter 7, “Parts listing, RS210 Types 6531, 6532, 6533, and 6534,” on page 177 to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU).

vIf an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained service technician.

Array %1 is in critical condition.	Error	An array is in Critical state.	Replace the hard disk drive that
(%1 = CIM_ComputerSystem.		(Sensor = Drive n Status)	is indicated by a lit status LED.
ElementName)		(n = hard disk drive
		number)
Array %1 has failed.	Error	An array is in Failed state.	Replace the hard disk drive that
(%1 = CIM_ComputerSystem.		(Sensor = Drive n Status)	is indicated by a lit status LED.
ElementName)		(n = hard disk drive
		number)
Memory uncorrectable error detected	Error	A memory uncorrectable	1. If the server failed the POST
for DIMM All DIMMs on Memory		error has occurred.
			memory test, reseat the
Subsystem All DIMMs.
			DIMMs.
			2. Replace any DIMM that is
			indicated by a lit error LED.
			Note: You do not have to
			replace DIMMs by pairs.
			3. Run the Setup utility to
			enable all the DIMMs.
			4. Run the DSA memory test.
Memory Logging Limit Reached for	Error	The memory logging limit	1. Update the server firmware to
DIMM All DIMMs on Memory		has been reached.
			the latest level.
Subsystem All DIMMs.
			Important: Some cluster
			solutions require specific code
			levels or coordinated code
			updates. If the device is part
			of a cluster solution, verify
			that the latest level of code is
			supported for the cluster
			solution before you update
			the code.
			2. Reseat the DIMMs and run
			the DSA memory test.
			3. Replace any DIMM that is
			indicated by a lit error LED.
Memory DIMM Configuration Error	Error	A DIMM configuration error	Make sure that DIMMs are
for All DIMMs on Memory		has occurred.	installed in the correct sequence
Subsystem All DIMMs.			and have the same size, type,
			speed, and technology.
Memory uncorrectable error detected	Error	A memory uncorrectable	1. If the server failed the POST
for DIMM One of the DIMMs on		error has occurred.
			memory test, reseat the
Memory Subsystem One of the
			DIMMs.
DIMMs.
			2. Replace any DIMM that is
			indicated by a lit error LED.
			Note: You do not have to
			replace DIMMs by pairs.
			3. Run the Setup utility to
			enable all the DIMMs.
			4. Run the DSA memory test.

38ThinkServer ThinkServer RS210, Types 6531, 6532, 6533, and 6534: Hardware Maintenance Manual