Pioneer DV-989AVi-S operating instructions Getting Started, Let’s Get Started

Getting Started

•Press to switch the player on or off (the player can be put into standby using the remote control; the STANDBY indicator above the button lights when in standby).

POWER

04

Let’s Get Started

When you switch on the player for the first time, you should see a welcome screen displayed on your TV. From here you can let the player know what kind of TV you have, then either use the Setup Navigator to make more settings, or jump right in and start playing some discs.

Before continuing, make sure that you’ve loaded the batteries in the remote control.

• When the player is in standby, you can use the OPEN/CLOSE and (play) buttons to switch the player on and open the disc tray/start playing a loaded disc.

•My DVD player switches on but there is nothing displayed on my TV.

Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.

•If you connected this player to an AV receiver, make sure that the receiver is switched on and set to the correct input.

•This player features a screen saver. When on, If the player is stopped or paused and no button is pressed for five minutes, the screen saver starts. See Screen Saver on page 64 for how to switch it on.

•If you have connected an HDMI-compat- ible device, the HDMI settings screen will appear instead of the setup screens below. See HDMI Settings on page 68 to make the necessary settings.

SETUP		TOP MENU
MENU
– MULTI SPEED +
ENTER
VIDEO	DIMMER	JOG MODE
RETURN ADJUST
V.ADJ	FL	JOG
7	3	8
	/E	E/
4 ¢	1	¡

PLAY MODE SURROUND

1Use the Joystick (up/down) to choose a language, then press ENTER.

Let's Get Started Menu

Select the display language

using the cursor keys on the remote

English français Deutsch Italiano Español Nederlands

Choose one then press Enter

29

En