Pioneer DV-989AVi-S Audio Settings menu Chapter, Audio DRC, Legato PRO, Default setting Off

Audio Settings menu 06

Chapter 6

Audio Settings menu

Note about features in the Audio Settings menu

None of the features found in the Audio Settings menu have any effect on sound output through the i.LINK connector.

Audio DRC

• Default setting: Off

2Highlight Audio DRC, then use the Joystick (left/right) to change to ‘On’ or ‘Off’ as required.

Audio Settings	1/ 2
Audio DRC	Off
Legato PRO	Off
Hi-Bit	On
Virtual Surround
	Off
Channel Level
	Fix

When watching Dolby Digital DVDs at low volume, it’s easy to lose the quieter sounds completely—including some of the dialog. Switching Audio DRC (Dynamic Range Control) to On can help by bringing up the quieter sounds, while controlling loud peaks.

How much of a difference you hear depends on the material you’re listening to. If the mate- rial doesn’t have wide variations in volume, you may not notice much change.

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

	HOME MENU
	DVD
Audio Settings	Video Adjust
Play Mode	Disc Navigator
Initial Settings	Setup Navigator

3Press ENTER to make the setting and exit the Audio Settings screen.

•Audio DRC is only effective with Dolby Digital audio sources.

•Audio DRC is only effective through the digital output when Digital Out is set to On, and Dolby Digital Out (see page 59) is set to Dolby Digital > PCM.

•The effect of Audio DRC depends on your speakers and AV receiver settings.

Legato PRO

• Default setting: Off

Legato PRO technology can reveal more high- frequency detail in CDs and DVDs by upsam- pling.

1Press HOME MENU and select ‘Audio Settings’ from the on-screen display.

51

En