Pioneer DV-989AVi-S operating instructions Link Setup, Connections Setup, Audio Out

08Initial Settings menu

Move the cursor right (or press ENTER) then use the Joystick (up/down) to set the channel output level.

Change this setting to Off if the i.LINK inter- face is still connected but you need to use one of the other outputs. Changing this setting to Off does not affect i.LINK thru data (i.e., if this

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

player is between two other i.LINK compo- nents, it will still pass data between them).

Set back to On (i.LINK-ready) to be able to use the i.LINK interface.

Connections Setup

To turn the test tone on/off for an individual speaker, move the cursor right. The test tone continues playing even when you select a different speaker.

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

Initial Settings
Digital Audio Out	Audio Out	VSX-49TXi
Video Output	Connections Setup	VSX-AX10i
Language	Auto Select Play	DV-47Ai
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

To save the settings and exit, press ENTER with the channel level field highlighted (as shown above).

•The subwoofer output will sound quite low compared to the other speakers.

i.LINK Setup

Audio Out

• Default setting: On

You only need to make this setting if you connected this player to other equipment using the i.LINK interface.

Initial Settings
Digital Audio Out	Audio Out	On
Video Output	Connections Setup	Off
Language	Auto Select Play
Display	DVD-Audio Out
Options
Speakers
i.LINK Setup

74

This screen shows the equipment connected using the i.LINK interface.

Components which are able to receive

i.LINK Audio are shown in black (an i.LINK receiver, for example); those which can’t (a DV camcorder, for example) are shown in gray. If the player can’t display the name of a component, ‘****’ is shown; if the name can’t be determined, Unknown is displayed.

Select the component that you want to set up the audio output formats for.

Initial Settings
Digital Audio Out	Connections Setup
Video Output	VSX-49TXi : Pioneer
Language
Display	DolbyDigital	PCM
Options	DTS	DTS
Speakers	MPEG	MPEG
i.LINK Setup

This screen shows the output settings for Dolby Digital, DTS and MPEG audio. Depending on the other component, these may be configured automatically. If this

En