Pioneer DV-989AVi-S operating instructions Additional information Troubleshooting, General

Additional information 09

Troubleshooting

Incorrect operation is often mistaken for trouble or malfunction. If you think that there is some- thing wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

General

Problem

The disc won’t play or is automatically ejected after loading.

Remedy

•Make sure the disc is free from dirt and dust and is not damaged (see Taking care of your player and discs on page 76).

•Make sure the disc is loaded with the label side face-up and aligned properly in the disc tray guide.

•Incompatible region number: If the region number on a DVD-Video disc does not match the number on the player, the disc cannot be used (see DVD-Video regions on page 11).

•Condensation inside the player: Allow time for condensation to evaporate. Avoid using the player near an air-conditioning unit.

DVD-Audio playback stops. • The disc may have been illegally copied.

Picture playback stops and	• Press , then start playback again ( ).
the operation buttons	• Switch the power off once, unplug from the wall socket, then plug
cannot be used.	back in and switch on again by pressing STANDBY/ON to switch
	the player on.
New settings made in the	• Some settings can be changed while a disc is playing, but are not
Setup screen menus while
	effective until the disc is stopped then restarted: Press , then start
a disc is playing are
	playback again ( ).
ineffective.
Settings are canceled.	• When the power is cut due to power failure or by unplugging the
	power cord during operation, settings will be canceled. See Moving
	the player on page 77 for proper shutdown instructions.

87

En