Rear Panel
1 | 2 | 3 | 4 | 5 | 6 |
|
|
|
| Y |
|
|
|
|
|
|
| COMPONENT |
|
|
|
|
|
|
| VIDEO OUT |
|
|
|
CONTROL | VIDEO OUT | VIDEO | PB |
|
|
| |
IN |
|
| OUT |
|
|
|
|
|
|
| SELECT |
|
|
|
|
|
|
|
| PR |
|
|
|
|
|
|
| AUDIO OUT (2CH) | AUDIO OUT (5.1CH) | ||
DIGITAL OUT |
|
|
| 1 | 2 | FRONT | SURROUND |
OPT. |
|
|
| L |
| L | CENTER |
|
|
|
| R |
| R | SUB |
|
|
|
|
| WOOFER | ||
|
|
|
|
|
|
| AC IN |
9 | 8 | 7 |
1CONTROL IN jack
Use to connect this player to another component bearing the Pioneer ë mark. This lets you control this unit as though it were a component in a system. Player operations are then performed by pointing the remote control at the component that the player is connected to (page 19).
5AUDIO OUT (2 CH) jacks
Use to output
2VIDEO OUT jack
Connect to the video input on a TV or monitor or AV amplifier or receiver with video input capability. When using this jack, be sure to set VIDEO OUT SELECT to the left position (page 19).
3
If your TV or monitor has an
4COMPONENT VIDEO OUT jacks
If your projection monitor, projector or similar component has component video inputs, you can produce a higher quality picture on your projection monitor or projector by connecting to the component video outputs on this unit. When using these jacks, be sure to set VIDEO OUT SELECT to the right position (page 19).
6AUDIO OUT (5.1 CH) jacks
Use to output 6 discrete audio channels of decoded digital audio to a receiver or amplifier with discrete audio inputs (page 18).
7AC IN power cord connection terminal Use to connect the power cord to the wall outlet (page 15).
8VIDEO OUT SELECT switch
Use to set which output is used to output the video signals. Select either
9DIGITAL OUT jacks (coaxial, optical (OPT.)) Use to output the digital audio signal recorded on discs. You can output the digital signal via either coaxial or optical output jack to an AV amplifier or receiver (page 17).
12
