Adjusting Audio

and Video

Settings

Using the Setup Screen Menus

The procedure on page 28 and 29 describes how to operate the menus on the Setup screen. These menus are used to set and adjust a number of system settings. The various functions that can be adjusted are covered throughout this manual. The procedure on this page provides a basic outline for using the Setup screen menus.

When setting up for the first time

It is recommended to set up player using the [Setup Navigator] (page 20). If you selected “Not Used” when the [Setup Navigator] appears, you may still set up the player using the [Setup Navigator] in the General menu screen.

If you choose not to use the [Setup Navigator], be sure to make the necessary settings in the Setup screen Audio 1, Audio 2, Video, and Language menus as described on the following pages.

Some DVDs start playing automatically when loaded in the player. If a DVD has been loaded, be sure to press STOP 7 before proceeding.

0

STANDBY/ON

4 1 Á ¢

7 8 3

1

1

2

4,5

 

5

 

5

 

5

 

4

5

¢

1

3

Á

3,6

e

8 E

7

 

2 Press SETUP.

The Setup screen appears.

(Example)

Audio1 2 Video Language General

Dolby Digital Out – Dolby Digital

DTS Out – Off

Linear PCM Out – 96kHz 3 48kHz

MPEG Out – MPEG 3 PCM

Setup audio

Digital output format/tone adjust

Move

SETUP

Exit

3 Use the cursor buttons (2/3) to select the menu you want.

As each menu is selected with the cursor, the settings appear below the menu heading.

4 Press the cursor button (°) to enter the menu.

The top item within the menu becomes highlighted.

(Example)

Audio1 2 Video Language General

Dolby Digital Out Dolby Digital

DTS Out - Dolby Digital 3PCM

96kHz PCM Out – 96kHz 3 48kHz MPEG Out – MPEG 3PCM

Switch Dolby Digital audio mode

Move

SETUP

Exit

5 Use the cursor buttons (5/°) to select the setting you want to change.

The options available for each setting appear to the right when the setting is selected. The current setting appears with the setting indicator lit.

6 Press the cursor button (3) to enter the setting options.

(Example)

Audio1 2 Video Language General

Dolby Digital Out Dolby Digital

DTS Out - Dolby Digital 3PCM

Linear PCM Out – 96kHz 3 48kHz

MPEG Out – MPEG 3PCM

Output Dolby Digital

Move ENTER Select SETUP Exit

1 Press ( STANDBY/ON on the front panel)

Not all menu options can be changed while a disc is playing. In these cases, the options appear grayed out on the screen and cannot be adjusted. To change these settings, press STOP 7 first before pressing SETUP.

Operating the menu after pressing STOP 7 may cancel the resume function.

Some menu options are not immediately effective if set while a disc is playing. To make these settings effective, stop playback and then start again, or change the settings while the disc is stopped.

28

to turn the player on.

continued

Page 28
Image 28
Pioneer DV-C302D Video Settings, Use the cursor buttons 2/3 to select the menu you want, To turn the player on