24

Playing DVDs, Video CDs and

CDs – DVD/Video CD/CD
Before you can start to enjoy the digital audio and video
on DVDs, be sure that you have either performed the
Setup Navigator procedure described in the previous
section or made the necessary settings in the Setup
screen menus as outlined in the next section to set up
the player to correspond to your home system. Having
made these settings, you are now ready to start using
the player to enjoy DVDs, Video CDs, and CDs.
2Press OPEN/CLOSE 0 (0 on the front panel).
The disc tray comes out.
3Load a disc.
Load a disc with the label side facing up, using
the disc tray guide to align the disc.
Labels indicating disc numbers (1 through 3) are
affixed to the disc table. Press the DISC
CHANGE to rotate the disc tray and then load a
disc on to the disc table.
The number of the DISC buttons (1 through 3)
correspond with the numbers on the labels
affixed to the disc table
4Press PLAY 3 (3 on the front panel).
The disc located in the front and to the left of the
disc table is played.
Press one of the DISC buttons (1 through 3) to
begin playback of the selected disc.
Depending on the disc, a menu may be
displayed. If a menu is displayed, proceed to
step 5.
5Select the item you want to view.
When a DVD is loaded:
Use the cursor buttons (2/3/5/) to select the
item, then press ENTER. You may also be able to
use the number buttons for direct selection
(Depending on the disc, you may not be able to
use the number buttons).
When a Video CD is loaded:
Use the number buttons to select the item.
Notes
•Noise is output if you make digital audio connections to a
receiver or amplifier that does not have a built-in decoder.
Check that the digital audio output format selected in the
Audio 1 menu corresponds to the audio components you have
made connections to (page 30).
•The TV screen size is factory set to present the wide screen
format (16:9 aspect ratio). If you have a standard TV screen
(4:3 aspect ratio), this setting can be changed to match your TV
screen size in the Video menu (page 33).
Getting StartedUsing Your DVDPlayer
STANDBY/ON
41¢
¡
783
0
5
5
5
5
4¢
1
87
eE
¡3
2
4
5
5
1
4
STANDBY/ON
41¢
¡
783
0
1 3 4
5
2
43
1
1
2
3
1
2
1
2
3
3
1
1
2
1Press ( STANDBY/ON on the front panel)
to turn on the player.