Pioneer DVR-220 operating instructions Playing DVD discs, Playing CDs and WMA/MP3 discs

Getting started 04

Playing DVD discs

The table below shows the basic playback controls for DVD-Video, and recordable DVD discs.

PLAY Press to start playback.

If RESUME is displayed on-screen, play- back starts from the place last stopped.

				Press to stop playback.
			STOP
				You can resume playback from the same
				point by pressing PLAY. (Press STOP
				again to cancel the resume function.)
				Pauses playback, or restarts playback
			PAUSE
				when paused.
				Press to start scanning. Press repeatedly
REV SCAN		FWD SCAN
				to increase the scanning speed. (There are
				four scan speeds; the current scan speed
				is shown on-screen.)
				Press to skip to previous/next chapter/title.
	PREV		NEXT
				(You can also use the front panel +/– but-
				tons to do this during playback.)

Except VR mode: During playback, enter a chapter number then press ENTER to skip directly to that chapter within the currently

playing title.

CLEAR On some discs, you can also use the num- ber buttons to select numbered items in the disc menu.

VR mode only: During playback, enter a title number then press ENTER.

BACK CM SKIP (Commercial back/skip) Each press skips backward/forward progressively up to a

maximum of 10 minutes forward or 3 min- utes back.

STEP/SLOW During playback, press to start slow- motion playback. Press repeatedly to change the playback speed.

While paused, press to advance a single frame in either direction.

Press to display the ‘top’ menu or menu of TOP MENU MENU a DVD-Video disc (these are often the

same).

Use the cursor buttons to navigate DVD- Video disc menus; press ENTER to select

ENTER items.

RETURN Press to return to the previous level of a

DVD-Video disc menu.

Playing CDs and WMA/MP3 discs

The table below shows the basic playback controls for audio CDs, and WMA/MP3 files.

PLAY Press to start playback.

STOP Press to stop playback.

PAUSE Pauses playback, or restarts playback

when paused.

REV SCAN FWD SCAN CD and MP3 only: Press to start scanning. Press again to increase the scanning speed. (There are two scan speeds; the current scan speed is shown on-screen.)

		Press to skip to previous/next track (or
PREV	NEXT
		folder for WMA/MP3 disc). (You can also
		use the front panel +/– buttons to do this
		during playback.)

During playback, enter a track number then press ENTER to skip directly to that track.

CLEAR

Note

•If you want to play a DTS audio CD, make sure the recorder is connected to a DTS-compatible amplifier with a digital connection. Noise will be output through the analog outputs. Also make sure that STEREO is selected using the AUDIO button (see Switching audio channels on page 41).

•Scanning doesn’t work with WMA tracks.

29

En