Pioneer DVR-220 operating instructions Recording from a DV camcorder DVR-320 only, Stop REC

06Recording

5Press HOME MENU and select ‘Timer Recording’, then ‘Auto Start Rec’.

6Select ‘Start’ to switch Auto Start Recording on, or ‘Cancel’ to switch off.

7Switch the recorder into standby.

The AUTO indicator in the front panel display lights.

The recorder will automatically switch on and start recording when the other component comes on. Recording stops when the external component switches off.

• To cancel Auto Start Recording, press STANDBY/ ON. The indicator goes off.

• To cancel Auto Start Recording once recording has already started, press REC for 3 seconds, then

STOP REC.

•If you use the REC button to extend a timer recording that is active during Auto Start Recording standby, Auto Start Recording is canceled. (If you want to program a new end time for the timer recording, press the front panel + button for 3 seconds, then program the new time (see also Extending a timer recording in progress on page 49). Note that Auto Start Recording is canceled when you do this.)

Note

•You can’t set Auto Start Recording when:

•the recorder is recording or in timer recording standby.

•there is no recordable disc loaded.

•the disc loaded is locked.

•the disc loaded already contains the maximum number of titles (99).

•If Auto Start Recording is set, it will not start if another timer recording is in progress.

•Timer recordings take precedence over Auto Start Recording. Auto Start Recording will stop if a timer recording is due to start. After the timer recording has finished, Auto Start Recording will resume.

52

Recording from a DV camcorder (DVR-320 only)

VR mode Video mode

You can record from a DV camcorder connected to the DV IN/OUT jack on the front panel of this recorder. Using the recorder’s remote, you can control both the camcorder and this recorder.

Before recording, make sure that the audio input for the DV IN/OUT jack is setup (see DV Input (DVR-320 only) on page 78).

	CLEAR
	ENTER
HOME
MENU		RETURN
REV SCAN	PLAY	FWD SCAN

PAUSE STOP

STEP/SLOW

REC MODE

Important

•The source signal must be DVC-SD format

•Some camcorders cannot be controlled using this recorder’s remote.

•If you connect a second recorder using a DV cable, you cannot control the second unit from this one.

•You can’t control this unit remotely from a component connected to the DV IN/OUT jack.

•You can’t record date and time information from DV cassette.

•During DV recording, if a part of the tape is blank, or has copy-protected material on it, this recorder will pause recording. Recording will restart automatically when there is a recordable signal.

•For best results when recording from a DV camcorder to this recorder, we recommend cueing the camcorder to the place you want to start recording from and setting the camcorder to play- pause.

En