Pioneer DVR-541H-S On-screen displays and recorder displays, Message Explanation/Action

Additional information		15
Problem	Remedy
The picture freezes and	• Press STOP then try restarting playback.
the front panel and	• Press the front panel STANDBY/ON button to switch the power
remote control but-	off, then switch back on and restart playback. If the power fails to
tons stop working	switch off, press and hold STANDBY/ON for 5 seconds until the
	power switches off.
A device connected via	• Check that it is a device that may be connected to this unit (digital
USB does to function.	camera, USB memory, memory card reader or printer).
DVR-640H-S only	• Use a USB cable less than 5 m in length.
	• Check that the USB cable is inserted fully.
	• Check that the USB device is powered on.
	• Only the first digital camera, USB memory or memory card reader
	connected is readable by this unit. Unplug multiple devices and
	connect the device you want to use first.

If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.

On-screen displays and recorder displays

The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning.

Message	Explanation/Action
• Initializing disc. Please wait a	When you load a blank DVD-RW or DVD+RW disc,
moment.	the recorder automatically initializes it.

•Incompatible region number.The disc loaded has an incompatible region number for the recorder and so will not play.

•Cannot record any more titles.

•No more space for file management data.

The disc control data limit has been reached, or the maximum number of chapters and/or titles has been reached. Erase titles/chapters or combine chapters.

•This disc cannot be recorded. Undo the finalization.

The disc was finalized on a non-Pioneer DVD recorder. Undo the finalization in order to recording/editing.

127

En